TECHNICAL DATA

IL2902

Low Power Quad Operational Amplifier

The IL2902 contains four independent high gain operational

amplifiers with internal frequency compensation. The four op-amps

operate over a wide voltage range from a single power supply. Also use a

split power supply. The device has low power supply current drain,

regardless of the power supply voltage. The low power drain also makes

the IL2902 a good choice for battery operation.

ORDERING INFORMATION

IL2902N

Plastic

IL2902D

SOIC

for all packages.

When your project calls for a traditional op-amp function, now you

can streamline your design with a simple single power supply. Use

computer application, without requiring an extra 15V power supply just to

have the interface electronics you need.

The IL2902 is a versatile, rugged workhorse with a thousand-and-one

uses, from amplifying signals from a variety of transducers to dc gain

blocks, or any op-amp function. The attached pages offer some recipes

that will have your project cooking in no time.

•

Internally frequency compensated for unity gain

•

Large DC voltage gain: 100dB

•

Wide power supply range:

3V ~ 32V (or

±1.5V ~ ±16V)

•

Input common-mode voltage range includes ground

•

•

Power drain suitable for battery operation

•

Low input offset voltage and offset current

•

Differential input voltage range equal to the power supply voltage

LOGIC DIAGRAM

PIN 11= GND

PIN ASSIGNMENT

1