Published by Infineon Technologies AG

All Rights Reserved

Attention please!

The information herein is given to describe certain components and shall not be

considered as warranted characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties

of non-infringement, regarding circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices

please contact the Infineon Technologies offices or our Infineon Technologies

Representatives worldwide - see our webpage at

www.infineon.com/fiberoptics

Warnings

Due to technical requirements components may contain dangerous substances.

For information on the types in question please contact your Infineon Technologies

offices.

Infineon Technologies Components may only be used in life-support devices or

systems with the express written approval of Infineon Technologies, if a failure of

such components can reasonably be expected to cause the failure of that

life-support device or system, or to affect the safety or effectiveness of that device

or system. Life support devices or systems are intended to be implanted in the

human body, or to support and/or maintain and sustain and/or protect human life.

If they fail, it is reasonable to assume that the health of the user or other persons

may be endangered.

Infineon Technologies AG • Fiber Optics • Wernerwerkdamm 16 • Berlin D-13623, Germany

Infineon Technologies, Inc. • Fiber Optics • 1730 North First Street • San Jose, CA 95112, USA

Infineon Technologies K.K. • Fiber Optics • Takanawa Park Tower • 20-14, Higashi-Gotanda, 3-chome, Shinagawa-ku • Tokyo 141, Japan

EYE SAFETY

Ensure to avoid exposure of human eyes to high power laser

diode emitted laser beams. Especially do not look directly into

the laser diode or the collimated laser beam when the diode is

activated.

CLASS 3B LASER PRODUCT according to IEC 60825-1

Required Labels

Class IIIb LASER PRODUCT according to FDA Regulations

complies with 21 CFR 1040.10 and 1040.11

Required Label

Laser Data

CONNECTOR OPTIONS

Wavelength

1310 nm

Maximum total output power

less than 50 mW

INVISIBLE LASER RADIATION

AVOID EXPOSURE TO BEAM

Class 3B Laser Product

SEMICONDUCTOR LASER

INVISIBLE RADIATION

CLASS IIIb LASER PRODUCT

LASER RADIATION - AVOID

DIRECT EXPOSURE TO BEAM

Model

Type

SBL52414G

SBL51414G

SM FC/PC

SBL52414N

SBL51414N

SM SC/PC 0°

SBL52414Z

SBL51414Z

SM without connector