Hardware setup

Surround View Application,

User’s Guide, Rev. 1, 07/2018

NXP Semiconductors

3

that the next camera is housed on the right side to the previous camera (see Figure 3), not across

them.

• Connect both the USB keyboard and the USB mouse to the USB-C port on the CPU board (use

an USB hub for this step).

• Plug the SD card into the slot on the CPU board.

• Remove the plastic lens covers from the four-camera module.

• Connect an external HDMI monitor to the display converter.

• Connect the AC/DC adapter to the CPU board and switch on the board using the ON/OFF

push-button.

Figure 1. Surround View development platform based on i.MX 8QM device