Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

MXD202 Datasheet(PDF) 1 Page - List of Unclassifed Manufacturers

Part No. MXD202
Description  Low Cost, 2.0g, Dual Axis Accelerometer with Digital Outputs
Download  8 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  ETC1 [List of Unclassifed Manufacturers]
Homepage  
Logo 

MXD202 Datasheet(HTML) 1 Page - List of Unclassifed Manufacturers

   
Zoom Inzoom in Zoom Outzoom out
 1 / 8 page
background image
The MXD202 is a very low cost dual-axis acceleration sensor on a monolithic IC. With no moving parts,
the device is extremely reliable and is manufactured on a submicron CMOS process enabling small
geometries and small die size, resulting in low overall cost and high functionality. The MXD202 is pri-
marily designed for applications requiring high performance and where overall system cost is a driving
factor in component selection. The MXD202 measures acceleration with a full-scale range of up to ±
2.0g and produces a PWM digital signal output. Sensor is shipped with a duty cycle period of 10 milli-
Seconds (100 Hz). Special order sensors are available with a duty cycle period of 2.5 milli-Seconds
(400 Hz). Typical noise floor is .01% Duty Cycle
√Hz, allowing signals below 1.0 milli-g to be resolved.
Frequency response extends to 40 Hz. The frequency response can be extended to 160 Hz with the
implementation of a simple external circuit.
The MXD202 is a dc accelerometer with the capability to measure both ac acceleration, (typ-
ical of vibration) or dc accelerations, (such as inertial force or constant, gravity-induced accelerations).
The MXD202 offers digital output signals which duty cycles (ratio of pulse width to period)
are proportional to the acceleration in each of the axes of sensitivity. The outputs can be measured
directly with a microprocessor counter, eliminating the need for A/D converter or glue logic. The output
duty cycle is programmable over a wide range of sensitivity. MXD202 offers a calibrated temperature
sensor output with a positive temperature coefficient of 5.0 mV/°C. This device can be temperature
compensated easily. The change in sensitivity over the temperature range –40°C to 125°C is pre-
dictable and follows the physical gas laws. The following equation can be used to predict the sensitivi-
ty at any given temperature: SIN X (TIN)
2.67 = S
FIN X (TFIN)
2.67 (Temperature in °K) See Application Note
(AN-00MX-001).
The MXD202 is available in a metal can (TO-100) or a surface mount (LCC); both are her-
metic and are specified over the temperature range -40°C to 125°C.
General Description
MXD202 (DIGITAL)
Features
Low Cost, 2.0g, Dual Axis Accelerometer
with Digital Outputs
Applications
• Automotive - Vehicle Security/Active Suspension/ABS/HED Angle Control
• Security - Gas Line/Elevator/Fatigue Sensing
• Office Automation Equipment - Computer Peripherals/Disk Drives/PDA’s/Mouse
Smart Pens/Cell Phones/Printer Head Acceleration Sensor
• Gaming - Joystick/RF Interface/Menu Selection
• White Goods - Spin Control/Cooktop Vibration
Information furnished by MEMSIC is believed to be
accurate and reliable. However, no responsibility is
assumed by MEMSIC for its use, nor for any infringe-
ments of patents or other rights of third parties which
may result from its use. No license is granted by
implications or otherwise under any patent or patent
rights of MEMSIC.
Technical information.
Subject to change without notice.
®MEMSIC, Inc. 2000.
100 Burtt Road, Andover, MA 01810
Tel: 978.623.8188
Fax: 978.623.9945
www.memsic.com
MXD202 DIGITAL Data Sheet K 8/1/01
Page 1 of 8
Data Sheet
MXD202
• Dual axis acceleration outputs
• Digital outputs
• 1.0 mg Resolution in 1Hz bandwidth
• 40 Hz Bandwidth expandable to 160 Hz
• Quiescent Supply Voltage: 3.5 mA
• 0g output 50% duty cycle
• 50,000g shock survival
• 2.70V to 5.25V Single Supply
• On-chip mixed signal processing
• Continuous sensors self test
• Temperature sensor output (Tout) 5mV/°K
• Packaged in 8 pin LCC SMD or
10 pin TO-100 THRU-HOLE
• Hermetically sealed packaging
• Reference voltage (VREF) 2.50V
Block Diagram of MX20XX


Html Pages

1  2  3  4  5  6  7  8 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn