Electronic Components Datasheet Search |
|
48SD1616RPFH Datasheet(PDF) 11 Page - Maxwell Technologies |
|
48SD1616RPFH Datasheet(HTML) 11 Page - Maxwell Technologies |
11 / 42 page 48SD1616 11 All data sheets are subject to change without notice ©2005 Maxwell Technologies All rights reserved. 256Mb (4-Meg X 16-Bit X 4-Banks) SDRAM 01.07.05 REV 4 CKE Truth Table Note: H:V IH L:VIL x VIH or VIL Clock suspend mode entry: The SDRAM enters clock suspend mode from active mode by setting CKE to Low. If a command is input in the clock suspend mode entry cycle, the command is valid. The clock suspend mode change depending on the current status (1 clock before) as described below. ACTIVE clock suspend: This suspend mode ignores inputs after the next clock by internally maintaining the bank active status. READ suspend and READ with Auto-precharge suspend: The data being output is held ( and continues to be output). WRITE suspend and WRIT with Auto-precharge suspended: In this mode, external signals are not accepted. However, the internal state is held. Clock suspend: During clock suspend mode, keep the CKE to Low. Clock suspend mode exit: The SDRAM exits from clock suspend mode by setting CKE to High during the clock suspend state. IDLE: In this state, all banks are not selected, and have completed precharge operation. Auto-refresh command (REF): When this command is input from the IDLE state, the SDRAM starts auto- refresh operation. (The auto-refresh is the same as the CBR refresh of conventional DRAMs.) During the auto-refresh operation, refresh address and bank select address are generated inside the SDRAM. For every auto-refresh cycle, the internal address counter is updated. Accordingly, 8192 cycles are required to refresh the entire memory contents. Before executing the auto-refresh command, all the banks must be in CURRENT STATE COMMAND N -1 N CS RAS CAS WE ADDRESS Active Clock suspended mode entry H L x x x x x Any Clock Suspend L L x x x x x Clock Suspend Clock Suspend mode exit L H x x x x x Idle Auto-refresh command (REF) H H L L L H x Idle Self-refresh entry (SELF) H L L L L H x Idle Power down entry HL LH H H x H L HL xxx x Self Refresh Self Refresh exit (SELFX) L H L H H H x Power down Power down exit LH LH H H x L H H xxx x |
Similar Part No. - 48SD1616RPFH |
|
Similar Description - 48SD1616RPFH |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |