Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF HTML

THNCFXXXBAI Datasheet(PDF) 7 Page - Toshiba Semiconductor

Part No. THNCFXXXBAI
Description  The THNCFxxxMBA/BAI series CompactFlash card is a flash technology based with ATA interface flash memory card.
Download  48 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  TOSHIBA [Toshiba Semiconductor]
Homepage  http://www.semicon.toshiba.co.jp/eng
Logo 

THNCFXXXBAI Datasheet(HTML) 7 Page - Toshiba Semiconductor

Zoom Inzoom in Zoom Outzoom out
 7 / 48 page
background image
THNCFxxxMBA/BAI Series
2002-10-20
7/48
Preliminary
Signal Name
Dir
Pin No.
Description
GND
(PC Card Memory Mode)
GND
(PC Card I/O Mode)
GND
(True IDE Mode)
1,50
Ground
INPACK
(PC Card Memory Mode)
This signal is not used in this mode.
INPACK
(PC Card I/O Mode)
The Input Acknowledge signal is asserted by the CompactFlash
Storage Card when the card is selected and responding to an I/O
read cycle at the address that is on the address bus. This signal is
used by the host to control the enable of any input data buffers
between the CompactFlash Storage Card and the CPU.
INPACK
(True IDE Mode)
O
43
In True IDE Mode this output signal is not used and should not be
connected at the host.
IORD
(PC Card Memory Mode)
This signal is not used in this mode.
IORD
(PC Card I/O Mode)
This is an I/O Read strobe generated by the host. This signal gates
I/O data onto the bus from the CompcatFlash Storage Card when
the card is configured to use the I/O interface.
IORD
(True IDE Mode)
I
34
In True IDE Mode, this signal has same function as in PC Card I/O
Mode.
IOWR
(PC Card Memory Mode)
This signal is not used in this mode.
IOWR
(PC Card I/O Mode)
The I/O Write strobe pulse is used to clock I/O data on the Card
Data bus into the CompactFlash Storage Card controller registers
when the CompactFlash Storage Card is configured to use the I/O
interface.
The clocking will occur on the negative to positive edge of the
signal (trailing edge)
IOWR
(True IDE Mode)
I
35
In True IDE Mode, this signal has the same function as in PC Card
I/O Mode.
OE
(PC Card Memory Mode)
This is an Output Enable strobe generated by the host interface .It
is used to read data from the CompactFlash Storage Card in
Memory Mode and to read the CIS and configuration registers.
OE
(PC Card I/O Mode)
In PC Card I/O Mode, this signal is used to read the CIS and
configuration registers.
ATA SEL
(True IDE Mode)
I
9
To enable True IDE Mode this input should be grounded by the
host.


Html Pages

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48 


Datasheet Download




Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn