![]() |
Electronic Components Datasheet Search |
|
ADUM7703 Datasheet(PDF) 9 Page - Analog Devices |
|
ADUM7703 Datasheet(HTML) 9 Page - Analog Devices |
9 / 22 page ![]() Data Sheet ADuM7703 Rev. 0 | Page 9 of 22 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS NIC1 NIC1 VDD1 VIN+ NIC1 GND1 VIN– GND1 GND2 NOTES 1. NIC1 = NOT INTERNALLY CONNECTED. THESE PINS ARE NOT INTERNALLY CONNECTED. CONNECT TO VDD1, GND1, OR LEAVE FLOATING. 2. NIC2 = NOT INTERNALLY CONNECTED. THESE PINS ARE NOT INTERNALLY CONNECTED. CONNECT TO VDD2, GND2, OR LEAVE FLOATING. 3. CONNECT GND1 BEFORE VDD1. NIC2 MDAT NIC2 NIC2 GND2 VDD2 MCLKIN 1 2 3 4 8 7 6 5 16 15 14 13 9 10 11 12 ADuM7703 TOP VIEW (Not to Scale) Figure 5. 16-Lead SOIC_W Pin Configuration Table 11. 16-Lead SOIC_W Pin Function Descriptions Pin No. Mnemonic Description 1, 5, 7 NIC1 Not Internally Connected. These pins are not internally connected. Connect these pins to VDD1, GND1, or leave floating. 2 VIN+ Positive Analog Input. 3 VIN− Negative Analog Input. 4, 8 GND1 Ground 1. These pins are the ground reference point for all circuitry on the isolated side. 6 VDD1 Supply Voltage, 4.5 V to 20 V. This pin is the supply voltage for the isolated side of the ADuM7703 and is relative to GND1. For device operation, connect the supply voltage to Pin 7. Decouple the supply pin to GND1 with a 10 μF capacitor in parallel with a 100 nF capacitor as close to the pin as possible. 9, 16 GND2 Ground 2. These pins are the ground reference point for all circuitry on the nonisolated side. 10, 12, 15 NIC2 Not Internally Connected. These pins are not internally connected. Connect these pins to VDD2, GND2, or leave floating. 11 MDAT Serial Data Output. The single-bit modulator output is supplied to this pin as a serial data stream. The bits are clocked out on the rising edge of the MCLKIN input and are valid on the following MCLKIN rising edge. 13 MCLKIN Master Clock Logic Input, 5 MHz to 21 MHz frequency range. The bit stream from the modulator is propagated on the rising edge of the MCLKIN. 14 VDD2 Supply Voltage, 3 V or 5.5 V. This pin is the supply voltage for the nonisolated side and is relative to GND2. Decouple this supply to GND2 with a 10 μF capacitor in parallel with a 100 nF capacitor as close to the pin as possible. |
Similar Part No. - ADUM7703 |
|
Similar Description - ADUM7703 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |