2

features make the HCPL-4504

series an excellent solution to IPM

inverter dead time and other

switching problems. The CTR,

propagation delay, and CMR are

specified both for TTL and IPM

conditions which are provided for

ease of application. These single

channel, diode-transistor opto-

couplers are available in 8-Pin

DIP, SO-8, and Widebody

Schematic

Selection Guide

Standard 8-Pin

White Mold 8-Pin

Widebody

Package Type

DIP (300 Mil)

DIP (300 Mil)

Small Outline SO8

(400 Mil)

Part Number

HCPL-4504

HCPL-J454

HCPL-0454

HCNW4504

IEC/EN/DIN EN

60747-5-2

(Option 060)

(Option 060)

Approval

Ordering Information

Specify Part number followed by Option Number (if desired)

Example

HCPL-4504 #XXXX

020 = UL 5000 Vrms/1minute Option* for HCPL-4504 Only.

060 = IEC/EN/DIN EN 60747-5-2 Option* for HCPL-4504/0454.

300 = Gull-Wing Lead Option for HCPL-4504/J454, HCNW4504.

500 = Tape and Reel Packaging Option.

XXXE = Lead Free Option

Option data sheets available. Contact Agilent sales representative or authorized distributor for information.

*Combination of Option 020 and Option 060 is not available.

Remarks: The notation “#” is used for existing products, while (new) products launched since 15th July

2001 and lead free option will use “-”

package configurations. An

insulating layer between a LED

and an integrated photodetector

provide electrical insulation

between input and output.

Separate connections for the

photodiode bias and output-

transistor collector increase the

speed up to a hundred times that

of a conventional phototransistor

coupler by reducing the base

collector capacitance.

IF

SHIELD

8

6

5

GND

VCC

2

3

VO

ICC

VF

IO

ANODE

CATHODE

+

–