Luxeon Emitter DS25 (4/05)

2

Mechanical Dimensions

Batwing

Notes:

1.

The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board

is required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug.

2.

All dimensions are in millimeters.

3.

All dimensions without tolerances are for reference only.

Lambertian

Notes:

1.

The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board

is required—slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug.

2.

All dimensions are in millimeters.

3.

All dimensions without tolerances are for reference only.

Drawings not to scale

Drawings not to scale