GRM0225C1E1R1WA03 datasheet(29/30 Pages) MURATA | Chip Monolithic Ceramic Capacitor for General

Part #	GRM0225C1E1R1WA03

Description	Chip Monolithic Ceramic Capacitor for General

Download	30 Pages

Scroll/Zoom	100%

Manufacturer	MURATA [Murata Manufacturing Co., Ltd.]

Direct Link	http://www.murata.com

Logo

29 / 30 page

■ Others

1.Transportation

1. The performance of a capacitor may be affected by the conditions during transportation.

1-1. The capacitors shall be protected against excessive temperature, humidity and mechanical force during transportation.

(1) Climatic condition

　･ low air temperature : -40℃

･ change of temperature air/air : -25℃/+25℃

･ low air pressure : 30 kPa

･ change of air pressure : 6 kPa/min.

(2) Mechanical condition

Transportation shall be done in such a way that the boxes are not deformed and forces are not directly passed

on to the inner packaging.

1-2. Do not apply excessive vibration, shock, or pressure to the capacitor.

(1) When excessive mechanical shock or pressure is applied to a capacitor, chipping or cracking may occur

in the ceramic body of the capacitor.

(2) When the sharp edge of an air driver, a soldering iron, tweezers, a chassis, etc. impacts strongly on the surface

of the capacitor, the capacitor may crack and short-circuit.

1-3. Do not use a capacitor to which excessive shock was applied by dropping etc.

A capacitor dropped accidentally during processing may be damaged.

2.Characteristics Evaluation in the Actual System

1. Evaluate the capacitor in the actual system,to confirm that there is no problem with the performance and specification

values in a finished product before using.

2. Since a voltage dependency and temperature dependency exists in the capacitance of high dielectric type ceramic

capacitors, the capacitance may change depending on the operating conditions in the actual system.

Therefore,be sure to evaluate the various characteristics, such as the leakage current and noise absorptivity,

which will affect the capacitance value of the capacitor.

3. In addition,voltages exceeding the predetermined surge may be applied to the capacitor by the inductance in

the actual system. Evaluate the surge resistance in the actual system as required.

Notice

JEMCGC-2701X

29

Similar Part No. - GRM0225C1E1R1WA03

Manufacturer	Part #	Datasheet	Description
Murata Manufacturing Co...	GRM0225C1E1R1WDAE	50Kb / 1P	Temperature range of temperature characteristics

Manufacturer	Part #	Datasheet	Description
Murata Manufacturing Co...	GRM31BR72H153KW10	695Kb / 25P	Chip Monolithic Ceramic Capacitor for General
	GRM319R11C334JA01	859Kb / 30P	Chip Monolithic Ceramic Capacitor for General
	GRM319R11E224KA01	828Kb / 30P	Chip Monolithic Ceramic Capacitor for General
	GRM319R11E274JA01	828Kb / 30P	Chip Monolithic Ceramic Capacitor for General
	GRM319R11E564JA01	859Kb / 30P	Chip Monolithic Ceramic Capacitor for General
	GRM319R11E564KA01	859Kb / 30P	Chip Monolithic Ceramic Capacitor for General
	GRM319R11E684KA01	859Kb / 30P	Chip Monolithic Ceramic Capacitor for General
	GRM319R11E684MA01	859Kb / 30P	Chip Monolithic Ceramic Capacitor for General
	GRM319R71C224MA01	828Kb / 30P	Chip Monolithic Ceramic Capacitor for General
	GRM319R71C564KA01	828Kb / 30P	Chip Monolithic Ceramic Capacitor for General
	GRM319R71E334MA01	828Kb / 30P	Chip Monolithic Ceramic Capacitor for General