ISL43210A datasheet(3/12 Pages) RENESAS | Medium-Voltage, Single Supply, Single SPDT Analog Switch

3 / 12 page

ISL43210A

FN7876 Rev 0.00

Page 3 of 12

Jun 24, 2011

Absolute Maximum Ratings

Thermal Information

V+ to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to 16.5V

Input Voltages

IN (Note 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)

NO, NC (Note 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)

Output Voltages

COM (Note 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to ((V+) + 0.3V)

Continuous Current (Any Terminal) . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA

Peak Current NO, NC, or COM

(Pulsed 1ms, 10% Duty Cycle, Max) . . . . . . . . . . . . . . . . . . . . . . . . . 40mA

ESD Rating

Human Body Model (Tested per JESD22-A114E) . . . . . . . . . . . . . . . . 2kV

Machine Model (Tested per JESD22-A115-A) . . . . . . . . . . . . . . . . . 100V

Latch Up (Tested per JESD-78B; Class 2, Level A) . . . . . . . . . . . . . . 100mA

Thermal Resistance (Typical)

JA (°C/W)

JC (°C/W)

6 Ld SOT-23 Package (Notes 7, 8) . . . . . . .

175

Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . +150°C

Maximum Storage Temperature Range. . . . . . . . . . . . . . . . . -65°C to +150°C

Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below

http://www.intersil.com/pbfree/Pb-FreeReflow.asp

Operating Conditions

Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C

Maximum Operating Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V

CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product

reliability and result in failures not covered by warranty.

NOTES:

6. Signals on NC, NO, COM, or IN exceeding V+ or GND are clamped by internal diodes. Limit forward diode current to maximum current ratings.

JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.

8. For

JC, the “case temp” location is taken at the package top center.

Electrical Specifications - 12V Supply Test Conditions: V+ = +10.8V to +15V, GND = 0V, VINH = 4V, VINL = 0.8V (Note 9),

Unless Otherwise Specified. Boldface limits apply over the operating temperature range, -40°C to +85°C.

PARAMETER

TEST CONDITIONS

TEMP

(°C)

MIN

(Notes 10, 11) TYP

MAX

(Notes 10, 11) UNITS

ANALOG SWITCH CHARACTERISTICS

Analog Signal Range, VANALOG

Full

V+

ON-Resistance, rON

V+ = 10.8V, ICOM = 1.0mA, VNO or VNC = 10V

(see Figure 5)

Full

rON Matching Between Channels, rON V+ = 10.8V, ICOM = 1.0mA, VNO or VNC = 10V

0.8

Full

rON Flatness, RFLAT(ON)

V+ = 10.8V, ICOM = 1.0mA, VNO or VNC = 3V, 6V, 9V

(Note 12)

Full

NO or NC OFF Leakage Current, INO(OFF)

or INC(OFF)

V+ = 15V, VCOM = 1V, 12V, VNO or VNC = 12V, 1V

-3

0.01

Full

-5

COM OFF Leakage Current, ICOM(OFF)

V+ = 15V, VCOM = 12V, 1V, VNO or VNC = 1V, 12V

-3

0.01

Full

-5

COM ON Leakage Current, ICOM(ON)

V+ = 15V, VCOM = 1V, 12V, or VNO or VNC = 1V, 12V or

floating

-5

Full

-10

DYNAMIC CHARACTERISTICS

Turn-ON Time, tON

VNO or VNC = 10V, RL = 1kΩ, CL = 35pF, VIN =0V to

(see Figure 1)

Full

Turn-OFF Time, tOFF

VNO or VNC = 10V, RL = 1kΩ, CL = 35pF, VIN = 0V to 4V

(see Figure 1)

Full

Break-Before-Make Time Delay, tD

RL = 300Ω, CL = 35pF, VNO or VNC = 10V,

VIN = 0V to 4V (see Figure 3)

Full

Charge Injection, Q

CL = 1.0nF, VG = 0V, RG = 0Ω (see Figure 2)

OFF Isolation

RL = 50Ω, CL = 5pF, f = 1MHz (see Figure 4)

ISL43210A Datasheet(PDF) 3 Page - Renesas Technology Corp

ISL43210A Datasheet(HTML) 3 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

Datasheet Download

Link URL