Electronic Components Datasheet Search |
|
PLC Datasheet(PDF) 1 Page - PHOENIX CONTACT |
|
PLC Datasheet(HTML) 1 Page - PHOENIX CONTACT |
1 / 3 page © PHOENIX CONTACT - 02/2007 103153_00_en INTERFACE PLC ACCESSORIES Data Sheet Description PLC-ESK Power Terminal Block The 9 mm PLC-ESK GY power terminal block is the same shape as the PLC INTERFACE modules. It is used to supply the bridging potentials. Its nominal current is 32 A. For currents ≤ 6 A, the power can be supplied directly at the connection terminal blocks of one of the connected PLC INTERFACE modules. FBST Plug-In Bridges The colored, insulated FBST plug-in bridges reduce wiring time for the PLC INTERFACE modules by up to 70% in comparison with conventionally wired relay modules. 2-pos. FBST 6 single plug-in bridges are ideal for bridging a smaller number of modules and total currents ≤ 6 A. For a circuit supplied from both sides, they offer the advantage that the circuit can be opened at any point, while allowing all the other modules to continue being supplied at the same time. If a PLC-ATP insulating plate is to be bypassed with single plug-in bridges, the FBST 8 2-pos. plug-in bridge must be used. The FBST 14 2-pos. plug-in bridge connects adjacent connections on a 14 mm PLC INTERFACE module. In this way, contacts can be connected in series or in parallel without additional wiring. 500 mm long FBST 500 continuous plug-in bridges can be used to bridge up to 80 modules quickly and easily at a time. PLC-ATP Insulating Plate The PLC-ATP insulating plate should always be installed at the start and end of every terminal strip. In addition to the visual separation of function blocks, it is also necessary in some cases to install the insulating plate between adjacent PLC INTERFACE modules, e.g., when three phases (L1, L2, L3) are used on the contact side of the PLC INTERFACE modules. PLC-ATP has prescored break-out points at the bridging positions, so that individual bridges can be passed through if necessary. PLC-BP Feed-Through Bridge Instead of a relay or solid-state relay, the PLC-BP (A1-14) passive feed-through bridge can be inserted in the basic terminal block of the PLC INTERFACE series. This enables a passive connection to be established between terminal points A1 and 14. PLC-V8 Adapter The PLC-V8 adapter can be used to connect both 6.2 mm and 14 mm PLC INTERFACE modules quickly and easily to the VARIOFACE system cabling (see INTERFACE catalog). Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. This data sheet is valid for all products listed on the following page: Accessories for the PLC INTERFACE Series |
Similar Part No. - PLC |
|
Similar Description - PLC |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |