Electronic Components Datasheet Search |
|
ACT2804 Datasheet(PDF) 1 Page - Active-Semi, Inc |
|
ACT2804 Datasheet(HTML) 1 Page - Active-Semi, Inc |
1 / 23 page Innovative Power TM - 1 - www.active-semi.com Copyright © 2017 Active-Semi, Inc. FEATURES Dedicated Single-chip Integrated Battery Power Manager Dual Cell Battery Charger with Cell Balancing Management Auto Detection support USB BC1.2, Chinese YD/T 1591-2009, Apple 2.4A, and Samsung Devices Passed Apple MFi Test 4.5V-5.5V Input Voltage with 3.8A Input Current Limit 2.4A+1.0A Dual Outputs with CC Regulation 5.07V+/-1% Output with Prioritized Power Path from Input to Output 4.2V/4.35V +/- 0.5% Battery Charge Voltage Accuracy of Each Cell Output Plug-in Detection Wakeup and No Load Detection Sleep Mode Optimized Power Path and Battery Charge Control <10uA Low Battery Drainage Current I2C Port for Optimal System Performance and Status Reporting Configurable Charge, Discharge and HZ modes >92% Charge and Discharge Efficiency at 3.4A Output for Full Battery Range 4 Modes of LED Operation Capability to Charge Wearable Devices Weak Input Sources Accommodation Safety: Input Over-voltage Protection Nearly Zero Power Short Circuit Protection Output Over-voltage Protection Battery Over-charge and Over-discharge Protections Charge/Discharge Thermal Regulation TQFN5x5-40 Package APPLICATIONS Backup Battery Pack Power Bank Dual Cell Boost Battery Charger Bluetooth Speaker Standalone Battery Charger with USB Output GENERAL DESCRIPTION ACT2804 is a space-saving and dedicated single- chip solution for dual-cell battery charge and discharge. It takes 5V USB input source to charge a dual cell battery with boost configuration in three phases: preconditioning, constant current, and constant voltage. Charge is terminated when the current reaches 10% of the fast charge rate. The battery charger is thermally regulated at 110˚C with charge current foldback. If input 5V is not present, ACT2804 discharge a dual cell battery with buck configuration to provide 5.07V+/-1% to output ports. There is a power path from input to output. The cycle-by-cycle peak current mode control, constant current regulation, short circuit protection and over voltage protection maximize safe operation. ACT2804 provides 4 LED drive pins for battery capacity level and charge status indication to indicate 25%, 50%, 75%, and 75% above battery level with battery impedance compensation. The LED indication patterns are programmable . ACT2804 is available in a thermally enhanced 5mmx5mm QFN55-40 package with exposed pad. 5V/3.4A Dual Cell Battery Power Manager Rev 3, Apr-17-2017 ACT2804 Buck Output CC/CV 6.0 5.0 4.0 3.0 2.0 1.0 0 Output Current (mA) 0 500 1000 1500 2000 2500 3000 VBAT = 8.2V VBAT = 6.0V 1A Output 2.4A Output |
Similar Part No. - ACT2804_17 |
|
Similar Description - ACT2804_17 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |