Electronic Components Datasheet Search |
|
DCPSR2-12S05H Datasheet(PDF) 2 Page - Wall Industries,Inc. |
|
DCPSR2-12S05H Datasheet(HTML) 2 Page - Wall Industries,Inc. |
2 / 5 page Rev A DCPSR2 SERIES 30 Watts Non-Isolation DC/DC Converter Single Output 7/10/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 2 of 5 SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit PROTECTION Short Circuit Protection Continuous, Automatic Recovery Over Load Protection % of Iout rated, Hiccup Mode DCPSR2-5SXX 8 A Others 3.6 Over Temperature Protection Internal IC Junction +150 ºC ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature With Derating -40 +100 ºC Storage Temperature -55 +125 ºC Maximum Case Temperature +105 ºC Relative Humidity 5 95 %RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF MIL-HDBK-217F, Full Load 13,520,000 Hours GENERAL SPECIFICATIONS Efficiency See Table Switching Frequency DCPSR2-5SXX 1200 kHz Others 410 PHYSICAL SPECIFICATIONS Weight 0.092oz (2.6g) Dimensions (L x W x H) Standard Model 0.55in x 0.30in x 0.40in (14mm x 7.5mm x 10.1mm) Model with Heatsink (“H” Suffix) 1.26in x 0.35in x 0.43in (32mm x 9mm x 10.9mm) Case Material Non-Conductive Black Plastic Potting Material Silicone (UL94 V-0) SAFETY CHARACTERISTICS Safety Approvals UL60950-1 EN60950-1 IEC60905-1 NOTES 1. Heatsink is available for all models. To indicate heatsink option add “H” to the end of model number. Ex DCPSR2-5S1P2H -Due to high output power of DCPSR2-24SXX heatsink is able to be operated at least 50ºC ambient temperature without derating when applied input voltage does not exceed 30V. Other models can meet this condition without heatsink. Heatsink can be installed for higher operating ambient temperature as well. For more information, please contact factory. 2. For DCPSR2-12SXX and DCPSR3-24SXX the input should install an external 22µF/50V E/C only if the input will be switched electromechanically. CAUTION: This power module is not internally fused. An input fuse must always be used. *Due to advances in technology, specifications subject to change without notice. |
Similar Part No. - DCPSR2-12S05H |
|
Similar Description - DCPSR2-12S05H |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |