Electronic Components Datasheet Search |
|
CR24S12-33RH Datasheet(PDF) 1 Page - Wall Industries,Inc. |
|
CR24S12-33RH Datasheet(HTML) 1 Page - Wall Industries,Inc. |
1 / 5 page Rev B CR SERIES 40 Watt DC/DC Power Converters 06/23/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: sales@wallindustries.com Page 1 of 5 Size: 2.00 x 1.00 x 0.40 inches (50.8 x 25.4 x 10.2 mm) Applications: • Wireless Networks • Telecom/Datacom • Industry Control Systems • Distributed Power Architectures • Semiconductor Equipment FEATURES • Input Under Voltage Protection • High Efficiency up to 92% • Remote ON/OFF Control • 2:1 Wide Input Voltage Ranges • Six-Sided Continuous Shielding • Low Stand-by Power Consumption • No Minimum Load Required • Single and Dual Outputs • 40 Watts Maximum Output Power • 1600VDC I/O Isolation • Short Circuit, Over Voltage, Over Load, & Over Temp. Protection • Wide Operating Temperature Range: -40°C to +85°C • CE Mark Meets 2006/95/EC, 2011/95/EC, & 2004/108/EC • Compliant to RoHS EU Directive 2011/65/EU • UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals • Optional Heatsink Available (Suffix “HS”) DESCRIPTION The CR series of DC/DC power converters provides 40 Watts of output power in an industry standard 2.00” x 1.00” x 0.40” package and footprint. This series has single and dual output models with 2:1 wide input voltage ranges of 9-18VDC, 18-36VDC, and 36-75VDC. Some features include high efficiency up to 92%, 1600VDC I/O isolation, six-sided shielding, and remote ON/OFF control. These converters are also protected against short circuit, over voltage, over load, and over temperature conditions. All models are RoHS compliant and have UL60950-1, EN60950-1, and IEC60950-1 safety approvals. This series is best suited for use in wireless networks, telecom/datacom, industry control systems, semiconductor equipment, and distributed power architectures. MODEL SELECTION TABLE SINGLE OUTPUT MODELS Model Number Input Voltage Range Output Voltage Output Current Output Ripple & Noise No Load Input Current Output Power Efficiency Maximum Capacitive Load Min Load Max Load CR12S33-33 12 VDC (9 - 18 VDC) 3.3 VDC 0mA 10A 75mVp-p 20mA 33W 90% 26600µF CR12S05-40 5 VDC 0mA 8A 75mVp-p 20mA 40W 91% 20000µF CR12S12-40 12 VDC 0mA 3.333A 100mVp-p 20mA 40W 91% 3900µF CR12S15-40 15 VDC 0mA 2.666A 100mVp-p 20mA 40W 91% 2600µF CR12S24-40 24 VDC 0mA 1.666A 150mVp-p 20mA 40W 91% 1300µF CR24S33-33 24 VDC (18 - 36 VDC) 3.3 VDC 0mA 10A 75mVp-p 15mA 33W 91% 26600µF CR24S05-40 5 VDC 0mA 8A 75mVp-p 15mA 40W 92% 20000µF CR24S12-40 12 VDC 0mA 3.333A 100mVp-p 15mA 40W 92% 3900µF CR24S15-40 15 VDC 0mA 2.666A 100mVp-p 15mA 40W 92% 2600µF CR24S24-40 24 VDC 0mA 1.666A 150mVp-p 15mA 40W 91% 1300µF CR48S33-33 48 VDC (36 - 75 VDC) 3.3 VDC 0mA 10A 75mVp-p 10mA 33W 91% 26600µF CR48S05-40 5 VDC 0mA 8A 75mVp-p 10mA 40W 92% 20000µF CR48S12-40 12 VDC 0mA 3.333A 100mVp-p 10mA 40W 92% 3900µF CR48S15-40 15 VDC 0mA 2.666A 100mVp-p 10mA 40W 92% 2600µF CR48S24-40 24 VDC 0mA 1.666A 150mVp-p 10mA 40W 92% 1300µF DUAL OUTPUT MODELS Model Number Input Voltage Range Output Voltage Output Current Output Ripple & Noise No Load Input Current Output Power Efficiency Maximum Capacitive Load Min Load Max Load CR12D12-40 12 VDC (9 - 18 VDC) ±12 VDC 0mA ±1.666A 100mVp-p 20mA 40W 90% ±2600µF CR12D15-40 ±15 VDC 0mA ±1.333A 100mVp-p 20mA 40W 91% ±1600µF CR12D24-40 ±24 VDC 0mA ±0.833A 150mVp-p 20mA 40W 91% ±650µF CR24D12-40 24 VDC (18 - 36 VDC) ±12 VDC 0mA ±1.666A 100mVp-p 15mA 40W 90% ±2600µF CR24D15-40 ±15 VDC 0mA ±1.333A 100mVp-p 15mA 40W 91% ±1600µF CR24D24-40 ±24 VDC 0mA ±0.833A 150mVp-p 15mA 40W 91% ±650µF CR48D12-40 48 VDC (36 - 75 VDC) ±12 VDC 0mA ±1.666A 100mVp-p 10mA 40W 91% ±2600µF CR48D15-40 ±15 VDC 0mA ±1.333A 100mVp-p 10mA 40W 91% ±1600µF CR48D24-40 ±24 VDC 0mA ±0.833A 150mVp-p 10mA 40W 90% ±650µF NOTES 1. The CR series can only meet EMI Class A or Class B with external components added. Please contact factory for more information. 2. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. For 12VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ58A, 58V, 3000 Watt peak pulse power) diode in parallel. For 24VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ64A, 64V, 3000 Watt peak pulse power) diode in parallel. For 48VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ120A, 120V, 3000 Watt peak pulse power) diode connected in parallel. 3. Both positive logic and negative logic remote ON/OFF control is available. Positive logic remote ON/OFF comes standard; for negative logic remote ON/OFF add the suffix “R” to the model number (Ex: CR48S05-40R). 4. Optional heatsink is available. Please call factory for ordering details. CAUTION: This power module is not internally fused. An input line fuse must always be used. Due to advances in technology, specifications subject to change without notice. |
Similar Part No. - CR24S12-33RH |
|
Similar Description - CR24S12-33RH |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |