Electronic Components Datasheet Search
  English  ▼

Delete All
ON OFF
ALLDATASHEET.COM

X  

Preview PDF Download HTML

LS7232ND Datasheet(PDF) 1 Page - LSI Computer Systems

Part No. LS7232ND
Description  TOUCH CONTROL LAMP DIMMER
Download  5 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  LSI [LSI Computer Systems]
Homepage  http://www.lsicsi.com
Logo 

LS7232ND Datasheet(HTML) 1 Page - LSI Computer Systems

   
Zoom Inzoom in Zoom Outzoom out
 1 / 5 page
background image
TOUCH CONTROL LAMP DIMMER
DESCRIPTION:
LS7232ND is a MOS integrated circuit designed to control
brightness of incandescent lamps. The output of this IC controls
the brightness of a lamp by controlling the firing angle of a triac
connected in series with the lamp. All internal timings are syn-
chronized with the line frequency by means of a built-in phase-
lock loop circuit. The output occurs once every half-cycle of the
line frequency. Within the half-cycle, the output can be posi-
tioned anywhere between 158˚conduction angle for maximum
brightness and 41˚ conduction angle for minimum brightness in
relation to the AC line frequency. The positioning of the output is
controlled by applying a low level at the SENS input or a high
level at the EXT input.
These functions may be implemented with very few interface
components, as shown in Figure 5. When implemented in this
manner, touching of the Touch Plate causes the lamp brightness
to change as follows:
1.
If the Touch Plate is touched momentarily (42ms to 333ms),
the lamp is:
a) turned off if it was on,
b) turned on if it was off.
The brightness resulting is either full brightness or,
depending on the mode, a previous brightness stored in the
IC memory.
2.
If the Touch Plate is touched
for a prolonged time
(more than 342ms) the light intensity changes slowly. As
long as the touch is maintained, the change continues; the
direction of change reverses whenever the maximum or
minimum brightness is reached.
INPUT/OUTPUT DESCRIPTION:
VSS (Pin 1)
Supply voltage positive terminal.
MODE (Pin 2)
The LS7232ND can operate in either of 3 modes, Mode 0,
Mode 1 or Mode 2. A full description of the operating modes is
provided in Table 1. The MODE input level selects the operating
mode as follows:
1
2
3
4
8
7
6
5
TRIG
V DD (-V)
EXT
SENS
V SS (+V)
MODE
CAP
SYNC
FIGURE 1
PIN ASSIGNMENT - TOP VIEW
MODE Input
Mode
Functional Equivalent*
VDD
0
LS7231
Vss
1
LS7232
Float
2
LS7233
*NOTE:
The LS7232ND can replace LS7231, LS7232 and
LS7233 where the DOZE input is not used. The LS7232 PCB
requires no change. The LS7233 PCB requires that the Pin 2
connection be opened. The LS7231 PCB requires that the Pin
2 connection be made to VDD instead of Vss.
CAP (Pin 3)
The CAP input is for the PLL filter capacitor.
A 0.047µF capacitor should be connected to this input.
SYNC (Pin 4)
The AC Line Frequency is applied to this input through an ex-
ternal RC circuit (See Figure 5). The Phase-Lock Loop in the
IC synchronizes all internal timings to the AC signal at the
SYNC input.
SENS (Pin 5)
A low level activates this input (See Table 1) which controls the
turn-on, turn-off and conduction angle, Ø (See Figure 3), of the
TRIG signal with respect to the SYNC input.
EXT (Pin 6)
The EXT input is functionally identical to the SENS input except
that a high level activates this input. It is recommended that the
EXT input be used instead of the SENS input when long exten-
sion wires are employed between the IC and the Sensing Cir-
cuitry (See Figure 5 and Figure 6) because the EXT input is
less susceptible to noise.
7232ND-012703-1
January 2003
FEATURES:
• Phase-lock loop synchronization
allows use in Wall Switch applications.
• Provides brightness control of incandescent lamps
with touch plates or pushbutton switches.
• Controls the duty cycle from 23% to 88%
(conduction angles for AC half-cycles
between 41˚ and 158˚, respectively.)
• Operates at 50Hz/60Hz line frequency.
• Extension input for remote activation.
• +12V to +18V Power Supply voltage (VSS - VDD).
• LS7232ND (DIP); LS7232ND-S (SOIC ) - See Figure 1
LSI/CSI
LSI Computer Systems, Inc. 1235 Walt Whitman Road, Melville, NY 11747
(631) 271-0400 FAX (631) 271-0405
LS7232ND
UL
®
A3800


Html Pages

1  2  3  4  5 


Datasheet Download



Related Electronics Part Number

Part NumberComponents DescriptionHtml ViewManufacturer
LS7231TOUCH CONTROL LAMP DIMMER 1 2 3 4 5 MoreLSI Computer Systems
LS7232NTPROXIMITY/TOUCH CONTROL HALOGEN LAMP DIMMER 1 2 3 4 5 MoreLSI Computer Systems
LS7237TOUCH CONTROL LAMP STEP DIMMER 1 2 3 4 LSI Computer Systems
LS7631TOUCH CONTROL HALOGEN LAMP DIMMER 1 2 3 4 LSI Computer Systems
LS7538TOUCH CONTROL STEP DIMMER LIGHT SWITCH WITH AUTOMATIC GAIN CONTROL AGC 1 2 3 4 LSI Computer Systems
ML237B6 CHANNEL TOUCH CONTROL INTERFACE 1 2 List of Unclassifed Manufacturers
L9830MONOLITHIC LAMP DIMMER 1 2 3 4 5 MoreSTMicroelectronics
HI-2410CAPACITIVE TOUCH LIGHT DIMMER CIRCUITS 1 2 3 Holt Integrated Circuits
HK612TOUCH DIMMER IC 1 List of Unclassifed Manufacturers
TT6061ATOUCH DIMMER 1 Tontek Design Technology

Link URL




Privacy Policy
ALLDATASHEET.COM
Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Alldatasheet API   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn