DS109 LUXEON F PC Amber Product Datasheet 20170507 ©2017 Lumileds Holding B.V. All rights reserved.

2

General Product Information

Product Test Conditions

LUXEON F PC Amber LEDs are tested and binned using a 20ms monopulse (MP) at 350mA drive current for LUXEON F PC Amber

and 1000mA for LUXEON F Plus PC Amber, case temperature, T

Part Number Nomenclature

Part numbers for LUXEON F PC Amber and LUXEON F Plus PC Amber follow the convention below:

L F M H – A B

Where:

L

– designates LUXEON

F

– designates LUXEON F product family

M H

– designates hot binning

A

– designates color variant (L=PC Amber)

B

C

– designates binning current (A=350mA and C=1000mA)

E

– designates future product offerings

Therefore, the following part number is used for a LUXEON F Plus PC Amber 1000mA with a minimum luminous flux of

150 lumens:

L F M H – L 1

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON F PC

Amber and LUXEON F Plus PC Amber is compliant to the European Union directives on the restriction of hazardous substances

in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will

not intentionally add the following restricted material to this LUXEON F: lead, mercury, cadmium, hexavalent chromium,

polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).

Figure 1: Example of case temperature location on sample board for LUXEON F PC Amber and LUXEON F Plus PC Amber .