Optically Coupled Isolator

OPI7002, OPI7002RCE, OPI7010, OPI7010RCE

OPI7320RCE, OPI7340RCE

© TT electronics plc

Issue C

10/2017

Page 2

TT Electronics | OPTEK Technology

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.ttelectronics.com | www.optekinc.com

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Notes:

(1)

Measured with input leads and output leads shorted.

(2)

RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.

(3)

Derate linearly 1.66 mW/° C above 25° C.

(4)

UL recognition is for 6kV dc for one minute

Operating Temperature Range

-40° C to +85° C

Storage Temperature Range

-40° C to +85° C

Input-to-Output Isolation Voltage

(1)(4)

±6 kVDC

Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron

(2)

260° C

Input Diode

Forward DC Current

50 mA

Peak Forward current (1 µs pulse width, 300 pps)

3 A

Reverse Voltage

2 V

Power Dissipation

(3)

100 mW

Output Phototransistor

Collector-Emitter Voltage

OPI7002, OPI7010, OPI7002RCE, OPI7010RCE

OPI7320RCE, OPI7340RCE

30 V

15 V

Emitter-Collector Voltage

5.0 V

Power Dissipation

(3)

100 mW