Electronic Components Datasheet Search |
|
408-8413 Datasheet(PDF) 9 Page - TE Connectivity Ltd |
|
408-8413 Datasheet(HTML) 9 Page - TE Connectivity Ltd |
9 / 11 page Rev B 9 of 11 4. Align the NO-GO element and try to insert it into the chamber. The element may start entry, but it must not pass completely through the crimping chamber. Repeat this procedure for the insulation-crimp chamber using a plug gage as shown in Figure 9, Detail B. If the crimping chambers pass the gage inspection, the crimping head is considered dimensionally correct and should be lubricated with a THIN coat of any good SAE 20 motor oil. If the crimping chambers do not conform to the plug gage conditions, contact your local TE field representative or refer to Section 7, REPLACEMENT AND REPAIR. Figure 9 Adjustment Lever in Position 1 (Ref) |
Similar Part No. - 408-8413 |
|
Similar Description - 408-8413 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |