Electronic Components Datasheet Search |
|
NTCALUG01A103F Datasheet(PDF) 1 Page - Vishay Siliconix |
|
NTCALUG01A103F Datasheet(HTML) 1 Page - Vishay Siliconix |
1 / 3 page NTCALUG01A Series www.vishay.com Vishay BCcomponents Revision: 17-Nov-17 1 Document Number: 29092 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTC Thermistors, Standard Lug Sensors DESIGN SUPPORT TOOLS • SPICE models available: www.vishay.com/doc?29178 • NTC curve computation: www.vishay.com/thermistors/ntc-curve-list/ Notes (1) Other R25-values, B25/85-values, and tolerances are available upon request (2) Measured with screw mounted on an aluminum heatsink of 100 cm2, thickness 1.5 mm, in still air at Tamb = +25 °C FEATURES • Easy mounting using ring tongue terminal • Rugged construction • Cable of PTFE insulation according to NEMA HP-3, type E, rated 600 VRMS (1) • AEC-Q200 qualified (grade 1) • UL recognized, file E148885 (UL category XGPU2) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note (1) Formerly MIL-W-16878/4, type E APPLICATIONS Suitable for surface sensing applications, especially when a good electrical insulation and a good thermal contact with the chassis is required. DESCRIPTION A NTC thermistor chip is soldered to AWG#24 stranded copper leads with PTFE insulation and insulated with epoxy coating. The insulated sensor is attached to a tin plated copper ring lug via a middle buffer layer. The lead wires are twisted and tinned. PACKAGING The thermistors are packed in cardboard boxes; the smallest packaging quantity is 500 units. MOUNTING • By means of M3 (Stud 3-4) screw. Leads to be soldered or crimped • The device is suitable for screwing e.g. on metal surface • The leads are suitable for soldering e.g. on PCB • Consult Vishay for other cable length, cable section, screw sizes, insulation, connector crimping, or other features QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 °C (1) 4.7K to 100K Tolerance on R25-value (1) ± 1 to ± 5 % B25/85-value (1) 3435 to 4190 K Tolerance on B25/85-value ± 0.5 to ± 1.5 % Operating temperature range at: °C Zero dissipation -40 to +150 Dissipation factor (2) 23 mW/K Thermal time constant (2) 7.5 s Min. dielectric withstanding voltage between terminals and lug 1500 VAC Min. insulation resistance between terminals and lug at 500 VDC 100 M Climatic category (LCT / UCT / days) 40 / 150 / 56 Weight 1.6 g click logo to get started Available Models Available Design Tools |
Similar Part No. - NTCALUG01A103F |
|
Similar Description - NTCALUG01A103F |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |