www.ti.com

ABSOLUTE MAXIMUM RATINGS

DISSIPATION RATING TABLE

AVAILABLE OPTIONS

RECOMMENDED OPERATING CONDITIONS

TPA6120A2

SLOS431 – MARCH 2004

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage.

TPA6120A2

33 V

(2)

± V

CC

6 V

Minimum load impedance

8

Ω

Continuous total power dissipation

See Dissipation Rating Table

- 40

°C to 85°C

(3)

- 40

°C to 150°C

- 40

°C to 125°C

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

235

°C

(1)

Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating

conditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.

(2)

When the TPA6120A2 is powered down, the input source voltage must be kept below 600-mV peak.

(3)

The TPA6120A2 incorporates an exposed PowerPAD on the underside of the chip. This acts as a heatsink and must be connected to a

thermally dissipating plane for proper power dissipation. Failure to do so may result in exceeding the maximum junction temperature that

could permanently damage the device. See TI Technical Brief SLMA002 for more information about utilizing the PowerPAD thermally

enhanced package.

θ

JA

(1)

θ

JC

PACKAGE

(

°C/W)

(

°C/W)

POWER RATING

DWP

44.4

33.8

2.8 W

(1)

The PowerPAD must be soldered to a thermal land on the printed-circuit board. See the PowerPAD

Thermally Enhanced Package application note (SLMA002)

PACKAGE

PART NUMBER

SYMBOL

-40

°C to 85°C

TPA6120A2DWP

6120A2

(1)

The DWP package is available taped and reeled. To order a taped and reeled part, add the suffix R

to the part number (e.g., TPA6120A2DWPR).

MIN

MAX

UNIT

Split Supply

±5

±15

V

Single Supply

10

30

Load impedance

16

Ω

-40

85

°C

2