© 2017 Littelfuse Protection Relays & Controls

Personnel Protection

Specifications

Voltage Rating

See ordering information

Current Rating

100 A (continuous)

Load

3-phase, 3-wire (no neutral) or 1-phase

(line-to-line), 60 Hz

Short-Circuit

50,000 A

Current Rating

Trip Level Settings

Selectable (6, 10, 20, 30, 40, 50, 60, 70, 80, 90,

100 mA), or fixed at 20 mA

Trip Time Setting

Inverse time trip curve

Enclosure

NEMA 4X, Polyester, Lockable

Operating Temperature –35°C (–31°F) to +40°C(104°F), up to +66°C (151°F)

with derating

Wiring Requirements

2/0 AWG (maximum)

Approval

GFCI: UL Listed (enclosed models) and UL

Recognized component (open-chassis models)

EGFPD: cULus Listed (enclosed models) and cURus

Recognized Component (open-chassis models);

UL1998 Compliant (revision 01 or higher);

All models CSA Certified

Dimensions

Enclosed: H 453.8 mm (17.9”);

W 406.2 mm (16.0”); D 223.3 mm (8.8”)

Open-chassis: H 455.0 mm (17.9”);

W 340.7 mm (13.4”); D 174.9 mm (6.8”)

Warranty

1 year

Accessories

ACCESSORIES

REQUIREMENT

PAGE*

AC6000-OPI-00

Included

N/A

1N5339B

Included

120

SE-TA6

Optional

120

SE-TA6-SM

Optional

120

SE-TA6ASF-WL

Optional

120

AC6000-CART-00

Optional

N/A

AC6000-MNT-00

Optional

N/A

Ordering Information - Accessories

© 2017 Littelfuse Protection Relays & Controls

Littelfuse.com/IndustrialShockBlock

Connection Diagram

The SB6100 is installed in-line between incoming power or existing

over-current protection device and the load.

The open-chassis SB6100 can be installed in electrical equipment and

the enclosed version is typically wall-mounted.

Incoming Power

SB6100 Industrial

Shock-Block

Enclosed Model

Circuit Breaker

SB6100

Industrial

Shock-Block

Open-Chasis

Model

Circuit Breaker

Littelfuse reserves the right to make product changes, without notice. Material in this document is as accurate as known at the time of publication. Visit Littelfuse.com for the most up-to-date information.

Rev: 4-K-061517

Based on Manual Rev. 1-G-042417

SB6000 SERIES

Industrial Shock-Block

Operator Interface

(AC6000-OPI-00)

1N5339B - Termination Device

Axial-lead ground-check termination,

included with SB6000 series

SE-TA6 - Termination Assembly

Optional termination assembly with

terminals and mounting holes

SE-TA6-SM Stud-Mount

Termination Assembly

Optional ground-check termination

for submersible pumps

AC6000-CART-00

Two-wheeled Cart

Optional for mounting ISB to allow for

moving the unit while power is off

AC6000-MNT-00

Mounting Frame

Optional for mounting ISB to a cart

or other surface. Included with the

AC6000-CART-00.

A

B