CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

SMT Aluminum Electrolytic Capacitors - Low Impedance, 105 °C

Notice and Disclaimer:

All product drawings, descriptions, specifications, statements, information and data

(collectively, the“Information”) in this datasheet or other publication are subject to change. The customer is responsible

for checking, confirming and verifying the extent to which the Information contained in this datasheet or other

publication is applicable to an order at the time the order is placed. All Information given herein is believed to be

accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind,

expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell

Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell

Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty

or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,

warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or

operating environment. The Information is intended for use only by customers who have the requisite experience and

capability to determine the correct products for their application. Any technical advice inferred from this Information or

otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless

otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or

results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding

the design and manufacturing of its products, in light of the current state of the art, isolated component failures may

still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable

designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective

measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or

property damage. Although all product-related warnings, cautions and notes must be observed, the customer should

not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures

may not be required.