MKW2600 SERIES

DC/DC CONVERTER 15W

Notes

1 Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.

2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%

3 Ripple & Noise measurement bandwidth is 0-20MHz.

4 These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;

however they may not meet all specifications listed.

5 All DC/DC converters should be externally fused at the front end for protection.

6 Other input and output voltage may be available, please contact factory.

7 To order the converter with Remote On/Off function, add suffix RC (e.g. MKW2621-RC) to order code.

8 To order the converter with input filter meeting EN55022 ClassA, add suffixA (e.g. MKW2621A) to order code.

9 To order the converter with heatsink, please add suffix H (e.g. MKW2621H) to order code.

10 That “natural convection” is about 20LFM but is not equal to still air (0 LFM).

11 Specifications are subject to change without notice.

Package Specifications

Mechanical Dimensions

Pin Connections

Pin

Single Output

Dual Output

1

+Vin

+Vin

2

-Vin

-Vin

3

+Vout

+Vout

4

No Pin

Common

5

-Vout

-Vout

6

Remote On/Off (Optional)

NC: No Connection

►

All dimensions in mm (inches)

►

Tolerance: X.X±0.25 (X.XX±0.01)

X.XX±0.13 ( X.XXX±0.005)

►

Physical Characteristics

Case Size

: 50.8x25.4x10.2mm (2.0x1.0x0.40 inches)

Case Material

: Metal With Non-Conductive Baseplate

Base Material

: FR4 PCB (flammability to UL94V-0 rated)

Pin Material

: CopperAlloy with Gold Plate Over Nickel Subplate

Weight

: 32g

Heatsink (Option –H)

Physical Characteristics

Heatsink Material : Aluminum

Finish

: BlackAnodized Coating

Weight

: 9g

►

The advantages of adding a heatsink are:

1. To help heat dissipation and increase the stability

and reliability of DC/DC converters at high

operating temperature atmosphere.

2. To upgrade the operating temperature of DC/DC

converters, please refer to Derating Curve.

Bottom View

10.16

5.08

6.0

10.2

[0.24]

[0.40]

[0.40]

10.16

[0.40]

7.62

[0.30]

[0.20]

7.62

[0.30]

25.4 [1.00]

2.54

[0.10]

3

4

5

1

2

6

1.1 [0.04]

31.0[1.22]Max

17.2[0.68]Max

Converter

Clamp

Thermal pad

Heat-sink

Total Power In

Total Power International, Inc

Toll Free: 877-646-0900

www.total-power.com

Tota

Total Power International, Inc.