Electronic Components Datasheet Search |
|
M500MAB Datasheet(PDF) 2 Page - Systemsensor advanced ideas. |
|
M500MAB Datasheet(HTML) 2 Page - Systemsensor advanced ideas. |
2 / 4 page Page 2 A05-228-01 1551B with 6 ″ base 2551THR with 4 ″ base 1551B The 1551B Intelligent Ionization Smoke Sensor’s unique unipolar chamber responds quickly and uniformly to the broadest range of fires and can withstand wind gusts up to 1500 feet-per-minute without outputting an alarm level signal. Because of the unipolar chamber, the 1551B is more responsive than most ionization sensors. This makes it a more stable detector. Specifications – 1551B Dimensions Height: 2.3 ″ (5.8 cm), detector in base Diameter: 4.0 ″ (10.2 cm) installed in B501 base 6.1 ″ (15.5 cm) installed in B501B base Shipping Weight: 9.5 ounces (269 g) Temperature Range: 32 ° to 120°F (0° to 49°C) Humidity Range: 10% to 93% RH noncondensing Air Velocity Rating: 1,500 fpm Operating Voltage: 15–32 VDC peak, 6.5 mA current for visible LEDs latched on Standby Current: 200 µA Sensor: Unipolar, dual chamber Smoke Detector Spacing: On smooth ceilings (as defined in NFPA 72) spacing of 30 feet (900 sq. ft.) may be used as a guide. See NFPA 72 for more details on spacing requirements. 2551HR/2551THR The 2551HR Intelligent Photoelectronic Sensor represents the state of the art in smoke sensor technology. It features fully coated circuit boards, special insect and dirt protection and superior RF/transient protection. The sensor will transmit an analog value representative of the sensitivity that can be used by the system to determine when maintenance is required. Signal processing for alarm verification can be built into the system to provide immunity to false alarms. The 2551THR Intelligent Photoelectronic Sensor adds a thermal heat collector that will alarm at a fixed temperature of 135 °F. General Description All 500 Series sensors are simple to install, service, and maintain. Using a specially designed tool (XR5), maintenance personnel can easily remove and replace the plug-in detectors without using a ladder. 500 Series sensors incorporate built-in identification allowing the system to identify the type of sensor. They also have a built-in magnetic reed switch for local testing, and the 1551B, 2551HR, and 2551THR can be sensitivity tested with the MOD400R Field Sensitivity Test Tool. |
Similar Part No. - M500MAB |
|
Similar Description - M500MAB |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |