3

Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)†

Parameter

Symbol

Min.

Max.

Units

Conditions

3.8

V

Max Voltage on SCL, SDA, INT pads

-0.5

3.8

V

Storage Temperature Range

−40

85

°C

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

Note 1. All voltages are with respect to GND.

Recommended Operating Conditions

Parameter

Symbol

Min.

Typ.

Max.

Units

Operating Ambient Temperature

-40

85

°C

Supply voltage

1.7

3.6

V

total error including transients

-3

3

%

Parameter

Symbol

Min

Typ

Max

Units

Test Conditions

Active Mode Current

130

µA

Standby Current

1

2

µA

In Standby Mode. No

SCL, SDA Input High Voltage

1.5

V

SCL, SDA Input Low Voltage

0

0.4

V

0

0.4

V

-5

5

µA

Parameter

Test

Condition

RED Channel

Green Channel

Blue Channel

IR Channel

Unit

Min.

Max.

Min.

Max.

Min.

Max.

Min.

Max.

Irradiance

Response

λ = 465

0

5

6

17

80

120

0

4

%

λ = 525

3

10

80

120

10

30

0

3

λ = 625

80

120

18

33

0

3

0

3

λ = 850

0

3

0

3

0

3

80

120

Notes:

1. The percentage shown represents the ratio of the respective red, green, or blue channel value to the IR channel value.

2. The 465 nm input irradiance is supplied by an InGaN light-emitting diode with the following characteristics:

dominant wavelength _D = 465 nm, spectral halfwidth __½ = 22 nm.

3. The 525 nm input irradiance is supplied by an InGaN light-emitting diode with the following characteristics:

dominant wavelength _D = 525 nm, spectral halfwidth __½ = 35 nm.

4. The 625 nm input irradiance is supplied by a AlInGaP light-emitting diode with the following characteristics:

dominant wavelength _D = 625 nm, spectral halfwidth __½ = 15 nm.

5. The 850 nm input irradiance is supplied by a AlInGaP light-emitting diode with the following characteristics:

dominant wavelength _D = 850 nm, spectral halfwidth __½ = 40 nm.

Parameter

Min.

Typ.

Max.

Units

Test Conditions

Dark Count

0

3

counts

ADC Integration Time

2.97

3.125

3.28

ms

Full Scale ADC Counts Per Step

8192

counts

13 bit

Full Scale ADC Count Value

262,143

counts

18 bit, 100ms, G=1x