Electronic Components Datasheet Search |
|
TSDP341 Datasheet(PDF) 2 Page - Vishay Siliconix |
|
TSDP341 Datasheet(HTML) 2 Page - Vishay Siliconix |
2 / 7 page TSDP341.., TSDP343.. www.vishay.com Vishay Semiconductors Rev. 1.1, 22-Aug-14 2 Document Number: 82667 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note • Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Fig. 1 - Output Active Low Fig. 2 - Pulse Length and Sensitivity in Dark Ambient ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Supply voltage VS -0.3 to +6 V Supply current IS 3mA Output voltage VO -0.3 to (VS + 0.3) V Output current IO 5mA Junction temperature Tj 100 °C Storage temperature range Tstg -25 to +85 °C Operating temperature range Tamb -25 to +85 °C Power consumption Tamb ≤ 85 °C Ptot 10 mW Soldering temperature t ≤ 10 s, 1 mm from case Tsd 260 °C ELECTRICAL AND OPTICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Supply current Ev = 0, VS = 3.3 V ISD 0.27 0.35 0.45 mA Ev = 40 klx, sunlight ISH 0.45 mA Supply voltage VS 2.5 5.5 V Transmission distance Ev = 0, test signal see fig. 1, IR diode TSAL6200, IF = 150 mA d35 m Output voltage low IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see fig. 1 VOSL 100 mV Minimum irradiance Pulse width tolerance: tpi - 1/f0 < tpo < tpi + 4/f0, test signal see fig. 1 Ee min. 0.15 0.30 mW/m2 Maximum irradiance tpi - 1/f0 < tpo < tpi + 4/f0, test signal see fig. 1 Ee max. 30 W/m2 Maximum pulse width Ee min. > 10 mW/m2, tpi = 8/f0 tpo max. 11.5/f0 s Directivity Angle of half transmission distance ϕ1/2 ± 45 deg Ee T tpi *) t VO VOH VOL tpo 2) t Optical Test Signal (IR diode TSAL6200, IF = 0.4 A, N = 6 pulses, f = f0, t = 10 ms) Output Signal td 1) 1) 3/f 0 < td < 9/f0 2) t pi - 1/f0 < tpo < tpi + 4/f0 *) tpi ≥ 6/f0 is recommended for optimal function 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.1 10 1000 100 000 E e - Irradiance (mW/m 2) Output pulse width Input burst length Optical test signal, λ = 940 nm, f = 38 kHz, N = 8 carrier cycles |
Similar Part No. - TSDP341 |
|
Similar Description - TSDP341 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |