DIRECTIONAL YAGI ANTENNAS

Y(B)8966

FEATURES AND BENEFITS:

• All UHF and higher frequency antennas feature 360°

welds around each element and an end-of-

boom N connector feed with an internal

transmission line feeding the driven element.

• Every Yagi is tuned on a network analyzer for

best power match and lowest VSWR.

• All Yagi antennas ship complete with a high

quality cast aluminum mounting kit that includes

stainless steel hardware and allows vertical or

horizontal orientation during installation (VHF

models require light assembly).

APPLICATIONS:

• Point-to-point and multi-point / omnidirectional

outdoor antennas applications used by

private organizations and government

agencies around the globe.

•Typicalapplicationsincludetransportationsuch

asrailroadswitching,remotelocationsreporting

examplesthatincludeoilfields,weatherconditions

and,meterdatatransmissionsforutilities.

Laird premium series directional Yagi antennas are fully gold anodized for corrosion resistance. All

UHF and above frequency antennas feature internal matching to assure broad bandwidth and

resistance to severe weather conditions. There is no gamma match to ice up, corrode or detune. Our

engineering staff has optimized the product family for forward gain by computer analysis and then

field-tested each for conformance.

GOLD SERIES DIRECTIONAL YAGI ANTENNAS PROVIDE INDUSTRY-LEADING

DESIGN FEATURES WITH LONG TERM OPTIMAL PERFORMANCE

ANT-DS-Y(B)8966 1015

Electrical

Frequency Range

896 – 970 MHz

Frequency Bandwidth

74 MHz

VSWR

< 2:1

Return Loss

-10 dB max

Nominal Gain

9 dBd

Front to Back Ratio

20 dBd

Maximum Power

300 W

Nominal Impedance

50 Ω

Polarization

Vertical or

Horizontal

Pattern

Directional

Horizontal Beamwidth

(For Horizontal Polarization) 56°

Vertical Beamwidth

(For Vertical Polarization)

52°

Tuning

Fixed

Transmitting/Receiving

Both

Mechanical

Material

Aluminum

Length

27.688”

Height

6.75”

Boom Diameter

.875”

Weight

3.9 lbs

Rated Wind Velocity

150 mph (241 kph)

Rated Wind Velocity

(with 0.5” radial ice) 80 mph (130 kph)

Equivalent Flat Area

0.2492 sq. ft.

Cable

None

Termination

N-Female connector

Color

Gold or Black Anodized

Lightning Protection

Lightning Arrestor

Mounting Included

Heavy duty cast aluminum

bracket accommodates up

to 2-1/2” mast

Vertical-to-Vertical

Polarization

Azimuthal Pattern

(Y, Z, or E-plane)

Horizontal-to-Horizontal

Polarization

Azimuthal Pattern

(Y, Z, or H-plane)

Normalized to 9 dBd

Normalized to 9 dBd

Normalized to 9 dBd

Normalized to 9 dBd

Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and

application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or

suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold

pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Inc. All Rights Reserved. Laird,

Laird Technologies, the Laird Logo, and other marks are trade marks or registered trade marks of Laird Inc. or an affiliate company thereof. Other product or service names may be the

property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.

Americas: +1.847 839.6907

IAS-AmericasEastSales@lairdtech.com

Europe: +44.1628.858941

IAS-EUSales@lairdtech.com

Asia: +86.21.5855.0827.127

IAS-AsiaSales@lairdtech.com

www.lairdtech.com