Electronic Components Datasheet Search |
|
2-21012-8 Datasheet(PDF) 3 Page - TE Connectivity Ltd |
|
2-21012-8 Datasheet(HTML) 3 Page - TE Connectivity Ltd |
3 / 3 page View After Seating Applicator Shut Height (Ram Fully Down) (See Section 4, Step 1) Seating Height (Header Seated) 38.10 +0.25/-0.00mm [1.50 +.010/-.000 In.] Applicator Ram (Fully Down) Seating Tool Bottomed on Housing Floor Contact Posts in Holes in PC Board and Aligned with Holes in Board Support PC Board PC Board Support Fixture (Ref) 408-8465 3 of 3 Rev A Figure 3 5. TOOL INSPECTION Each seating tool is assembled and inspected before shipment. We recommend that the tool be inspected immediately upon arrival at your plant to ensure that it has not been damaged during shipment. Regular inspections should be performed by quality control personnel. A record of scheduled inspections should remain with the tool or be supplied to supervisory personnel responsible for the tool. The inspection frequency should be based on the amount of use, working conditions, operator training and skill, and established company standards. 6. MAINTENANCE It is recommended that each operator be made aware of, and responsible for, the following steps of daily maintenance: 1. Remove dust, moisture, and other contaminants with a clean, soft brush, or lint-free cloth. Do NOT use objects that could damage the tool. 2. Ensure that the screws are in place and secured. 3. When the tool is not in use, store it in a clean, dry area. 7. REPLACEMENT AND REPAIR The parts listed in Figure 2 are customer-replaceable. A complete inventory can be stocked and controlled to prevent lost time when replacement of parts is necessary. Order replacement parts through your Tyco representative, or call 1-800-526-5142, or send a facsimile of your purchase order to 717-986-7605, or write to: CUSTOMER SERVICE (038-035) TYCO ELECTRONICS CORPORATION PO BOX 3608 HARRISBURG PA 17105-3608 For customer repair service, call 1-800-526-5136. 8. REVISION SUMMARY Since the previous version of this document, the following changes were made: • Changed Paragraph 3.2. • Updated document to corporate requirements. |
Similar Part No. - 2-21012-8 |
|
Similar Description - 2-21012-8 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |