Electronic Components Datasheet Search |
|
ZSSC3015NE2T Datasheet(PDF) 1 Page - Integrated Device Technology |
|
ZSSC3015NE2T Datasheet(HTML) 1 Page - Integrated Device Technology |
1 / 48 page RBicdLite-AutoTM Sensor Signal Conditioner with Diagnostics ZSSC3015 Datasheet © 2016 Integrated Device Technology, Inc. 1 January 20, 2016 ZSSC3015 VBP VBN VSS Sig™ Vgate 0.1 µF V supply Ground +2.7 to +5.5 V OUT/OWI VDD Brief Description The ZSSC3015 sensor signal conditioner IC is adjustable to nearly all piezo-resistive bridge sensors. Measured and corrected bridge values are provided at the Sig™ pin, which can be configured as an analog voltage output or as a one-wire serial digital output. The ZACwire™ digital one-wire interface (OWI) can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The calibrated ZSSC3015 and a specific sensor are mated digitally: fast, precise, and without the cost overhead associated with trimming by external devices or laser. Integrated diagnostics functions make the ZSSC3015 parti- cularly well suited for automotive applications. Features • Digital compensation of sensor offset, sensitivity, temperature drift, and nonlinearity • Programmable analog gain and digital gain; accommodates bridges with spans < 1mV/V and high offset • Many diagnostic features on chip (e.g., EEPROM signature, bridge connection checks, bridge short detection, power loss detection) • Independently programmable high and low clipping levels • 24-bit customer ID field for module traceability • Internal temperature compensation reference (no external components) • Option for external temperature compensation with addition of single diode • Output options: rail-to-rail ratiometric analog voltage (12-bit resolution), absolute analog voltage, ZACwire™ digital one-wire interface • Fast power-up to data out response; output available 5ms after power-up • Current consumption depends on programmed sample rate and mode: 1mA down to 300µA (typ.) • Fast response time: 1.4ms typical • High voltage protection: ≤ 30V with external JFET • AEC-Q100 qualified Benefits • No external trimming components required • PC-controlled configuration and calibration via ZACwire™ one-wire interface – simple, low cost • High accuracy (as high as ±0.1% FSO @ -25 to 85°C; ±0.25% FSO @ -50 to 150°C) • Single-pass calibration – quick and precise Available Support • Evaluation Kit available • Mass Calibration System available • Support for industrial mass calibration available • Quick circuit customization possible for large production volumes Physical Characteristics • Wide operation temperature: –50°C to +150°C • Supply voltage 2.7 to 5.5V; with external JFET, 5.5 to 30V • Small SOP8 package ZSSC3015 Application Circuit |
Similar Part No. - ZSSC3015NE2T |
|
Similar Description - ZSSC3015NE2T |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |