Electronic Components Datasheet Search
5--22280--4 Datasheet(PDF) 1 Page - Tyco Electronics
MACOM [Tyco Electronics]
Double Action Hand Tool (DAHT)
Adapter Assembly 1213563-1
2010 Tyco Electronics Corporation, Berwyn, PA
All Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER 1-- 800-- 722-- 1111
PRODUCT INFORMATION 1-- 800-- 522-- 6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
17 MAR 10 Rev B
(For Use With 626 Pneumatic Tooling Assemblies)
Crimp Head (Ref)
DAHT Adapter Assembly 1213563--1 is designed to
accept the crimp head from any DAHT to adapt the
crimp head for use with 626 pneumatic tooling
assemblies. DAHTs are available from Tyco
Electronics. For information concerning the setup and
operation of the pneumatic tool, refer to Customer
This instruction sheet provides:
— recommended procedures for crimp head
removal from the hand tool
— crimp head installation into the adapter
— installation and removal of the cam and adapter
from the pneumatic tool
— maintenance, inspection, and repair information
for the adapter
For wire preparation and crimping procedure, and
crimp head maintenance, inspection, and repair, refer
to the associated instruction sheet.
Read these instructions thoroughly before
Dimensions are in millimeters [with inch
equivalents in brackets]. Figures and illustrations
are for identification only and are not drawn to
Reasons for reissue of this instruction sheet are
provided in Section 6, REVISION SUMMARY.
The adapter assembly facilitates the connection of the
crimphead (typical showninFigure1) tothe
pneumatic tool and provides the necessary motion of
the crimp head jaws when the pneumatic tool is
actuated. When the tool is actuated, the cam extends
into the adapter, contacting the crimp head jaws.
When the cam retracts, the force is removed from the
jaws and they return to their starting position.
The jaws may be opened and closed manually by
simultaneously squeezing the two opposing clevises,
which are coupled to the jaws. The quick pins secure
the crimp head to the adapter.
Does ALLDATASHEET help your business so far?
[ DONATE ]
All Rights Reserved©
2003 - 2017
|   Chinese :
| German :
| Japanese :
| Russian :
| Spanish :
| French :
| Italian :
| Portuguese :
| Polish :