Electronic Components Datasheet Search
Selected language     English  ▼
Part Name
         Description


5--21028--7 Datasheet(PDF) 6 Page - TE Connectivity Ltd

Part No. 5--21028--7
Description  Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
Download  7 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  TEC [TE Connectivity Ltd]
Homepage  http://www.te.com/usa-en/home.html
Logo 

   
 6 page
background image
408- 10040
Rev E
6
of 7
D. CERTI- CRIMP Hand Crimping Tool Ratchet
Control Inspection
The CERTI--CRIMP hand crimping tool ratchet control
feature on TE hand tools should be checked to
ensure that the ratchet does not release prematurely,
allowing the dies to open before they have fully
bottomed. Obtain a 0.025 mm [.001 in.] shim that is
suitable for checking the clearance between the
bottoming surfaces of the crimping dies. Proceed as
follows:
1. Select the maximum size wire for the tool and a
terminal.
2. Position the terminal and wire between the
crimping dies as described in Section 3.
3. Hold wire in place and squeeze tool handles
until the CERTI--CRIMP hand crimping tool ratchet
control releases. Hold the handles in this position,
maintaining just enough tension to keep the dies
closed.
4. Check the clearance between the bottoming
surfaces of the crimping dies with the 0.025 mm
[.001 in.] shim. If the clearance is 0.025 mm
[.001 in.] or less, the ratchet is considered
satisfactory. If the clearance exceeds 0.025 mm
[.001 in.], the ratchet is out of adjustment and must
be repaired.
7. REPLACEMENT AND REPAIR
Replaceable parts are listed in Figure 7. Parts other
than those listed in Figure 7 should be replaced by TE
to ensure quality and reliability of the tool. Order
replacement parts through your TE Representative, or
call 1--800--526--5142, or send a facsimile of your
purchase order to 1--717--986--7605, or write to:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105--3608
For tool repair service, please contact a TE
Representative at 1--800--526--5136.
8. REVISION SUMMARY
S
Updated document to corporate requirements
S
Added Figure 7




Html Pages

1  2  3  4  5  6  7 


Datasheet Download




Link URL

Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Bookmark   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl