Part No: A1S-017

A1S Series

Tilt Switch - Mercury

Tilt switches “make” when the electrode is tilted below horizontal and

“break” when tilted above the horizontal. Total travel from “make” to

“break” is the “Maximum included angle” shown below. The

component to which the switch is attached must have a total tilt angle

greater than the “Maximum included angle” for proper operation.

A1S-017 200606

Specifications are subject to change without notice. E&OE.

© American Electronic Components Inc 2006

American Electronic Components Inc.,

1101 Lafayette Street, Elkhart, Indiana. USA

Tel: +1-574-295-6330 Fax: +1-574-293-8013

Email: sales@aecsensors.com

http://www.aecsensors.com

Features:

* Un-Insulated

* Form: NO/NC/SPST/Mount dependent

* Angles Referenced from Horizontal

* Single Electrode

* Hermetically Sealed

* Small Package Size

* Narrow Included Angle

* High Current Capability

* Low Contact Resistance

* Long Life

Must Make / Break Angle * :

- 8º / + 8º

Maximum included Angle:

8º

* Make/break angles are electrode + (above) / - (below) 0° horizontal

reference

Switch Ratings:

Max Switching Voltage

24 VDC

Max Switching Current

1A: Tungsten Lamp 1A @13.8 VDC

Initial Contact Resistance (Max). Milliohms

30

Stand Off Voltage (contact to contact)

1500 VAC

Operating Temperature

-38º to 220º F / -38º to 105º C

Storage Temperature

-40º to 356º F / -40º to 180º C

Typical number of operations at specified load

10,000,000

G-Force Activation G-Level/Range

N/A

Dimensions:

Weight per 100pcs. Lbs / Kgs:

0.68 / 0.31

Body Length (less leads). Inches / Millimeters:

0.52 / 13.2

Maximum Diameter. Inches / Millimeters:

0.40 / 10.2

Materials:

Lead Wire Type

N/A

Lead wire length/skive/termination

N/A

Finish:

Tin