Electronic Components Datasheet Search |
|
312140-1 Datasheet(PDF) 2 Page - TE Connectivity Ltd |
|
312140-1 Datasheet(HTML) 2 Page - TE Connectivity Ltd |
2 / 3 page 408-6790 2 of 3 Rev C 4. MAINTENANCE AND INSPECTION It is recommended that a maintenance and inspection program be performed periodically to ensure dependable and uniform terminations. Though recommendations call for at least one inspection a month, frequency of inspection depends on: 1. The care, amount of use, and handling of the handle assembly. 2. The presence of abnormal amounts of dust and dirt. 3. The degree of operator skill. 4. Your own established standards. The handle assembly is inspected before being shipped; however, it is recommended that the handle assembly be inspected immediately upon arrival to ensure that the handle assembly has not been damaged during shipment. 4.1. Daily Maintenance Each operator should be aware of, and responsible for, the following: 1. Remove dust, moisture, and other contaminants with a clean brush, or soft, lint-free cloth. DO NOT use objects that could damage the handle assembly. 2. Ensure that all components are in place and properly secured. 3. With the terminating head in place, squeeze and release the cam handle to ensure that the mechanisms move smoothly. 4. Depress and release the spring-loaded ratchet pawl to ensure that the pawl moves freely. 5. Check the extension springs to ensure they are properly located and are not deformed. 4.2. Periodic Inspection 1. Remove any accumulated film with a suitable cleaning agent that will not affect plastic material. 2. Make sure all components are in place and are properly secured. Check the handle assembly for chipped, cracked, worn, or broken areas. If damage is evident, repair is necessary. See Section 6, REPLACEMENT AND REPAIR. 5. REPLACEMENT AND REPAIR Customer-replaceable parts are listed in Figure 3. A complete inventory can be stocked and controlled to prevent lost time when replacement of parts is necessary. Parts other than those listed should be replaced by Tyco Electronics Corporation to ensure quality and reliability of the handle assembly. Order replacement parts through your representative, or call 1-800-526-5142, or send a facsimile of your purchase to 717-986-7605, or write to: CUSTOMER SERVICE (038-035) TYCO ELECTRONICS CORPORATION PO BOX 3608 HARRISBURG PA 17105-3608 For customer repair service, call 1-800-526-5136. 6. REVISION SUMMARY Since the previous release of this instruction sheet, the new company logo has been applied. |
Similar Part No. - 312140-1 |
|
Similar Description - 312140-1 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |