Electronic Components Datasheet Search |
|
312067-1 Datasheet(PDF) 1 Page - TE Connectivity Ltd |
|
312067-1 Datasheet(HTML) 1 Page - TE Connectivity Ltd |
1 / 12 page ©2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company All Rights Reserved *Trademark TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners. 1 of 12 Instruction Sheet TOOLING ASSISTANCE CENTER 1-800-722-1111 PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at www.te.com 408-6788 Hand Crimping Tool and Cable Preparation Kit 59981-1 23 AUG 13 Rev L PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available. Figure 1 1. INTRODUCTION Hand Crimping Tool and Cable Preparation Kit 59981-1 (shown in Figure 1) is used to prepare and terminate RG-402 (3.581mm [.141 in.] outside diameter) and RG-405 (2.184mm [.086 in.] outside diameter) semi-rigid coaxial cable onto SMA Series, N Series, and TNC Series connectors listed in Figure 2. Read these instructions thoroughly before using the kit. NOTE Dimensions in this instruction sheet are in millimeters [with inches in brackets]. Figures and illustrations are for reference only and are not drawn to scale. Reasons for reissue of this instruction sheet are provided in Section 11, REVISION SUMMARY. 2. DESCRIPTION The kit contains a hand crimping tool (with a CERTI-CRIMP hand crimping tool ratchet control), two interchangeable die sets (one for RG-402 cable and the other for RG-405 cable), and three locators for specific connector terminations. See Figure 1. NOTE The tool ratchet ensures full crimping of the connector. Once engaged, the ratchet will not release until the handles have been FULLY closed. Do NOT adjust the ratchet. Die Set (Typ) Locator (Typ) Hand Crimping Tool 59980-1 (36-01) Kit 59981-1 Kit contains all the parts listed; part numbers in parenthesis are per MIL22520. All components listed can be ordered separately for specific application needs. CERTI-CRIMP* Hand Crimping Tool Ratchet Control Hex Wrench (.094-in.) 21027-6 Cable Dressing Fixture 311396-1 (36-07) Trimmer Tool 312317-1 (36-08) Cable Cutoff Fixture 311395-1 (36-09) Bend Tool Holder 311392-1 (36-10) 90 ° Bending Fixture Assembly (36-10) Conforming Block 312067-1 (36-10) Bend Segments: A -- 311386-1 (36-11) for RG-402, 3.17mm [.125 in]. Radius B -- 311386-2 (36-12) for RG-402, 6.35mm [.250 in.] Radius C -- 311386-3‘(36-13) for RG-405, 3.17mm [.125 in.] Radius Locators: A -- 220221-2 (36-04) for Plugs with Center Contact B -- 220220-2 (36-06) for Plugs without Center Contact C -- 220222-2 (36-05) for Jacks NOTE i NOTE i |
Similar Part No. - 312067-1 |
|
Similar Description - 312067-1 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |