Electronic Components Datasheet Search
Selected language     English  ▼
Part Name
         Description


4--22430--8 Datasheet(PDF) 1 Page - Tyco Electronics

Part No. 4--22430--8
Description  Feed- Through Head Assembly
Download  5 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  MACOM [Tyco Electronics]
Homepage  http://www.macom.com
Logo 

   
 1 page
background image
Instruction Sheet
Feed- Through Head Assembly 58443- 1
408--9607
LOC B
1
of 5
E
2010 Tyco Electronics Corporation, Berwyn, PA
All Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
20 DEC 10 Rev C
For Discrete Wire MTA- 156 Receptacles
Figure 1
Rod Inserter
Adjuster
Locating
Pawl
Wire Inserter
(Hidden)
Feed
Slide
Wire Subassembly
Retainer
Insert
Housing
1. INTRODUCTION
Feed--Through Head Assembly 58443--1 is used to
terminate discrete wires onto MTA--156 Receptacles
640599--[ ] (for wire size 18 AWG) and Receptacles
640604--[ ] (for wire size 26 AWG) with a maximum
insulation diameter of 2.41 mm [.095 in.]. Read these
instructions thoroughly before using the head.
The head must be mounted onto one of the following
tools (for operating procedure for the tool, refer to the
instructions packaged with the tool):
— Pistol Grip Manual Handle Assembly 58074--1
(408--6790)
— Electric Power Unit 931800--1 (409--5746)
— Pistol Grip Pneumatic Handle Assembly
58075--1 (408--6789)
— Pneumatic Power Bench Assembly 58338--1
(408--9393)
All numerical values in this instruction sheet are
in metric units [with U.S. customary units in
brackets]. Dimensions are in millimeters [and
inches]. Figures are not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 8, REVISION SUMMARY.
2. DESCRIPTION
The head serves as a guide and support for the
receptacle during termination.
Features of the head assembly (shown in Figure 1)
and functions are as follows:
Wire inserter—forces the wire into the two slotted
beams of the contact. Note that it provides support for
the contact beams when applying insertion force on
the wire.
Rod inserter adjuster—is a piston for the wire inserter
and regulates wire inserter travel.
Feed slide—automatically positions the receptacle
after each termination.
Locating pawl—aligns the receptacle for insertion,
and retains it during termination. The locating pawl is
sometimes referred to as the “anti--backup pawl.”
Insert housing—holds the receptacle in place in
relation to the wires.
Wire subassembly retainer—holds the wires in place
in relation to the receptacle.
3. TEST CRIMP AND HEAD ADJUSTMENTS
3.1. Test Crimp
1. Make a termination according to Section 4,
Steps 1 through 6. If the receptacle cannot be
inserted into the head, or if the receptacle is too
loose in the head, adjust the insert housing
according to Paragraph 3.2.
NOTE
i




Html Pages

1  2  3  4  5 


Datasheet Download




Link URL

Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Bookmark   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com 2003 - 2017    


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl