Electronic Components Datasheet Search
Selected language     English  ▼
Part Name
         Description


4--306105--5 Datasheet(PDF) 1 Page - TE Connectivity Ltd

Part No. 4--306105--5
Description  Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools.
Download  7 Pages
Scroll/Zoom Zoom In 100% Zoom Out
Maker  TEC [TE Connectivity Ltd]
Homepage  http://www.te.com/usa-en/home.html
Logo 

   
 1 page
background image
Instruction Sheet
Crimping Dies for
TERMINYL* and PLASTI- GRIP*
408--10051
LOC B
1
of 7
E
2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
23 MAR 11 Rev C
Terminals and Splices
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended--use, production operations is available.
Typical
Crimping
Dies
Moving
Die (Nest)
Stationary
Die (Anvil)
Locator
Shank
Stationary
Die (Anvil)
Moving
Die (Nest)
Locking
Flange
Latch Arm
Yoke
Yoke Set Screw
Adapter
Locator
CRIMPING DIE
WIRE SIZE (AWG)
PART NUMBER
COLOR CODE DOT
WIRE SIZE (AWG)
1901006--1
Red
8
1901007--1
Blue
6
Figure 1
1. INTRODUCTION
Crimping Dies 1901006--1 and 1901007--1 are used
with Battery Powered Hand Tool 1901343--1, --2, --3,
and --4 (Customer Manual 409--10070) and Battery
Powered Hand Tool 2031404--1, --11, --21, --31, and
--41 (Customer Manual 409--10103). The dies crimp
TERMINYL Terminals and Splices onto wire sizes 8
through 6 AWG, TERMINYL Splices with step--down
adapters onto wire sizes 16--14 through 6 AWG, and
PLASTI--GRIP Terminals and Splices onto wire sizes
8 through 6 AWG. Refer to Figure 1 to ensure
compatibility of crimping die part number, color code
dot, and wire size.
Dimensions in this document are in millimeters
[with inches in brackets]. Figures and Illustrations
are for reference only and are not drawn to scale.
2. DESCRIPTION
Each crimping die consists of a stationary die (nest)
and a moving die (anvil). The stationary die features a
locator. Each die contains a color code dot that
matches the color code of the terminal and splice.
When mated, the dies form a crimping chamber.
3. DIE INSTALLATION AND REMOVAL
3.1. Die Installation
1. Pivot the latch arm away from the yoke to open
the crimp head. See Figure 1.
2. Loosen the set screw in the yoke.
3. Insert the shank of the stationary die into the
yoke, and tighten the set screw.
4. Extend the ram until the ram set screw is visible.
NOTE




Html Pages

1  2  3  4  5  6  7 


Datasheet Download




Link URL

Does ALLDATASHEET help your business so far?  [ DONATE ]  

About Alldatasheet   |   Advertisement   |   Datasheet Upload   |   Contact us   |   Privacy Policy   |   Bookmark   |   Link Exchange   |   Manufacturer List
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl