1.0

REV

2014-11-11

DATE

SSt

BY

PSL

CHECKED

Würth Elektronik eiSos GmbH & Co. KG

EMC & Inductive Solutions

Max-Eyth-Str. 1

74638 Waldenburg

Germany

Tel. +49 (0) 79 42 945 - 0

www.we-online.com

eiSos@we-online.com

DESCRIPTION

WCAP-PTHR Aluminum Polymer

Capacitors

Order.- No.

870055775003

SIZE

A4

Size: 10.0 x 12.5

A Dimensions: [mm]

D ±0.5

P ±0.5

L ±t

t

Pin Ø ±0.02

a

b

10.0

5.0

12.5

1.5

0.6

5.0

0.9

B Recommended hole pattern: [mm]

C Schematic:

D1 Electrical Properties:

Properties

Capacitance

Rated voltage

Leakage current

Dissipation factor

ESR

Ripple current

Test conditions

0.25V; 120Hz

after 2 min.

120 Hz

100 kHz

100 kHz @105°C

C

UR

ILeak

DF

RESR

Iripple

Value

33

50

330

12

35

2000

Unit

µF

V (DC)

μA

%

mΩ

mA

Tol.

± 20%

max.

max.

typ.

max.

max.

E General information:

Aluminium Polymer Capacitors

Storage Conditions:

Operating Temperature:

Load Life:

Test conditions of Electrical Proper-

ties:

FIT according to

35°C, <45% RH

-55 °C up to +105 °C

2000 h @ +105°C / 50 V (DC)

20°C, 33% RH; if not specified differently

separate documentation

This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.

Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before

the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.