Specifications GAL26CV12

6

Specifications GAL26CV12C

Recommended Operating Conditions

Commercial Devices:

Ambient Temperature (T

Supply voltage (V

with Respect to Ground ..................... +4.75 to +5.25V

Industrial Devices:

Ambient Temperature (T

Supply voltage (V

with Respect to Ground ......................... +4.5 to +5.5V

Supply voltage V

Input voltage applied .......................... –2.5 to V

Off-state output voltage applied ......... –2.5 to V

Storage Temperature ................................ –65 to 150

°C

Ambient Temperature with

Power Applied ........................................... –55 to 125

°C

1. Stresses above those listed under the “Absolute Maximum

Ratings” may cause permanent damage to the device. These

are stress only ratings and functional operation of the device at

these or at any other conditions above those indicated in the op-

erational sections of this specification is not implied (while pro-

gramming, follow the programming specifications).

SYMBOL

PARAMETER

CONDITION

MIN.

MAX.

UNITS

Input Low Voltage

Vss – 0.5

—

0.8

V

Input High Voltage

2.0

—

Vcc+1

V

Input or I/O Low Leakage Current

0V

——

–100

µA

Input or I/O High Leakage Current

3.5V

——

10

µA

Output Low Voltage

——

0.5

V

Output High Voltage

2.4

——

V

Low Level Output Current

——

16

mA

High Level Output Current

——

–3.2

mA

Output Short Circuit Current

–30

—–130

mA

COMMERCIAL

Operating Power

L-7

—

90

130

mA

Supply Current

Outputs Open

INDUSTRIAL

Operating Power

L-10

—

90

150

mA

Supply Current

Outputs Open

1) The leakage current is due to the internal pull-up on all pins. See Input Buffer section for more information.

2) One output at a time for a maximum duration of one second. Vout = 0.5V was selected to avoid test problems caused by tester

ground degradation. Characterized but not 100% tested.

°C.

DC Electrical Characteristics

Over Recommended Operating Conditions (Unless Otherwise Specified)