409--10039

Customer Manual

“Micro” Pneumatic Tooling

1

of 15

LOC B

E

2010 Tyco Electronics Corporation, Berwyn, PA

All Rights Reserved

TE logo and Tyco Electronics are trademarks.

*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.

TOOLING ASSISTANCE CENTER 1--800--722--1111

PRODUCT INFORMATION 1--800--522--6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

17 MAR 10 Rev C

Assembly 1490567- 1

READ THIS FIRST !

2

.........................

SAFETY PRECAUTIONS

1. INTRODUCTION

3

...................................................

2. DESCRIPTION

4

.....................................................

2.1. Power Unit

5

....................................................

2.2. Hand Actuated System

6

...........................................

3. AIR LINE REQUIREMENTS AND SETUP

7

.................................

4. SYSTEM SETUP AND PREPARATION FOR OPERATION

8

.....................

4.1. Air Supply

8

....................................................

4.2. Extending the Piston

8

.............................................

4.3. Cam Tool Holder Assembly (Logic) Installation

9

..........................

4.4. Crimp Head or Adapter Installation

10

..................................

5. OPERATION

10

....................................................

6. MAINTENANCE AND INSPECTION

10

....................................

6.1. Inspection and Cleaning

10

.........................................

6.2. Lubrication

11

...................................................

7. TROUBLESHOOTING

12

..............................................

8. OPTIONS AND ACCESSORIES

12

.......................................

9. REPLACEMENT AND REPAIR

12

........................................

9.1. Replacement

12

.................................................

9.2. Stop Ring Replacement Procedure

12

..................................

9.3. Repair

13

......................................................

10. REVISION SUMMARY

13

.............................................