408-2453

DYNA-CRIMP HydraulicCrimping Head 69066

Rev B

4 of 5

Tyco Electronics Corporation

13. Turn the guide set screw (11) clockwise into

the slot in the ram to prevent the ram from turning.

Be sure that the screw does not prevent the ram

from moving freely.

14. Install the guide lock screw (10) securely

against the guide set screw (11).

15. Tighten the cylinder head assembly and install

and tighten the set screw (9).

16. To install the crimping head, refer to Section 3,

CRIMPING HEAD INSTALLATION.

7. REPLACEMENT AND REPAIR

Customer–replaceable parts are listed in Figure 5. A

complete inventory can be stocked and controlled to

prevent lost time when replacement of parts is

necessary. Order replacement parts through your

Tyco Electronics Representative, or call

1–800–526–5142, or send a facsimile of your

purchase order to 1–717–986–7605, or write to:

CUSTOMER SERVICE (38–35)

TYCO ELECTRONICS CORPORATION

P.O. BOX 3608

HARRISBURG, PA 17105–3608

Tools may also be returned for evaluation and repair.

For tool repair service, contact a Tyco Electronics

Representative at 1–800–526–5136.

8. REVISION SUMMARY

Revisions to this document include:

Section1, INTRODUCTION; CAUTION in

Paragraph 3.3; and Paragraph 6.4.2.

Section 3, CRIMPING HEAD INSTALLATION

Figure 5 (contd)

9

12d

12c

12b

12a

12e

8

11

10

12c

12

1

13

7

6

2

4

5