Electronic Components Datasheet Search |
|
UM1857 Datasheet(PDF) 3 Page - STMicroelectronics |
|
UM1857 Datasheet(HTML) 3 Page - STMicroelectronics |
3 / 9 page UM1857 Getting started DocID027377 Rev 2 3/9 1 Getting started The X-NUCLEO-IHM01A1 expansion board is a stepper motor driver covering a wide range of applications. The maximum ratings are: Power stage supply voltage (VS) from 8 V to 45 V Motor phase current up to 3 A rms To start your project with the board: 1. Check the jumper position in accordance with your configuration (see Section 2: "Hardware description and configuration" ). 2. Connect the board to the STM32 Nucleo board with the connector: a. Arduino UNO R3 for the X-NUCLEO-IHM01A1. b. ST Morpho for the X-NUCLEO-IHM01A. Up to three expansion boards can be stacked on the same STM32 Nucleo board, as described in Section 2.2: "Multi motor configuration". 1. Supply the board through input 1 (VS) and 2 (ground) of the connector CN1. 2. The power OK (green) and fault (red) LEDs turn on. 3. Develop your application using the examples provided with the firmware library. Further support material is available on the L6474 and STM32 Nucleo web pages (www.st.com/stm32nucleo). |
Similar Part No. - UM1857 |
|
Similar Description - UM1857 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |