DG2501, DG2502, DG2503

www.vishay.com

Vishay Siliconix

S14-1059-Rev. A, 19-May-14

1

Document Number: 62962

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

200

Ω, Low Leakage, Low Parasitic and Low Charge Injection,

Quad SPST Analog Switches

DESCRIPTION

The DG2501, DG2502, and DG2503 are monolithic quad

single-pole single-throw (SPST) analog switches that

operate from a single 1.8 V to 5.5 V power supply.

These switches are fully specified at 3 V and 5 V. The parts

feature low parasitic capacitance, low charge injection, and

low

leakage

performance

over

the

full

operating

temperature range of -40 °C to +85 °C. Their ESD/HBM

tolerance is over 8 kV.

The DG2501, DG2502, and DG2503 each feature four

independently selectable SPST switches with closely

matched channel resistance. The DG2501 is normally

closed, while the DG2502 is normally open.

The DG2503 has two normally open and two normally

closed

switches.

All

parts

are

guaranteed

break-before-make

operation

for

use

in

multiplexer

applications. The parts have a guaranteed control logic high

of 1.4 V when V+ is 3 V and 1.8 V when V+ is 5 V.

Each switch conducts equally well in both directions when

on, and each has an input signal range that extends to the

supplies.

The DG2501, DG2502, and DG2503 are ideal for portable

healthcare, instrument, and communication devices.

The DG2501, DG2502, and DG2503 are available in wafer

level CSP package with top side lamination.

The package has a 4 x 4 bump array, 0.35 mm pitch, and

1.44 mm x 1.44 mm length and width.

FEATURES

• 1.8 V to 5.5 V single supply operation

• Low leakage, 1 nA / max. at 85 °C

• Low switch off capacitance

• Rail-to-rail signal handling

• Latch up current > 800 mA (JESD78)

• ESD: 8000 V/HBM, 500 V/CDM

• Typical power consumption (< 0.01 μW)

• TTL/CMOS compatible

• Compact WCSP16 1.44 mm x 1.44 mm

• Material categorization: For definitions of compliance

APPLICATIONS

• Analog front end signal switching

• Sample-and-hold circuits

• Battery-powered systems

• Portable meters

• Automatic test equipment

• Medical and healthcare equipment

• Communication systems

FUNCTIONAL BLOCK DIAGRAM

Switches are shown for a Logic 0 Input

TRUTH TABLE

DG2501

DG2502

DG2503

LOGIC

SWITCH

LOGIC

SWITCH

LOGIC

SW1, SW4

SW2, SW3

0

ON

0

OFF

0

OFF

ON

1

OFF

1

ON

1

ON

OFF