AP1507

150KHz, 3A PWM Buck DC/DC Converter

This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of

this product. No rights under any patent accompany the sale of the product.

Rev.1.1 Oct 29, 2004

1/9

Features

- Output voltage: 3.3V, 5V, 12V and adjustable

output version

- Adjustable version output voltage range, 1.23V to

18V+4%

- 150KHz +15% fixed switching frequency

- Voltage mode non-synchronous PWM control

- Thermal-shutdown and current-limit protection

- ON /OFF shutdown control input

- Operating voltage can be up to 22V

- Output load current: 3A

- TO252-5L packages

- Low power standby mode

- Built-in switching transistor on chip

Applications

- Simple High-efficiency step-down regulator

- On-card switching regulators

- Positive to negative converter

General Description

The AP1507 series are monolithic IC designed for a

step-down DC/DC converter, and own the ability of

driving a 3A load without external transistor. Due to

reducing the number of external component, the

board space can be saved easily. The external

shutdown function can be controlled by logic level

and then come into standby mode. The internal

compensation makes feedback control have good

line and load regulation without external design.

Regarding protected function, thermal shutdown is

to prevent over temperature operating from damage,

and current limit is against over current operating of

the output switch. If current limit function occurred

frequency will be reduced. The AP1507 series

operates at a switching frequency of 150KHz thus

allowing smaller sized filter components than what

would be needed with lower frequency switching

regulators. Other features include a guaranteed

+4% tolerance on output voltage under specified

input voltage and output load conditions, and +15%

on the oscillator frequency. The output version

included fixed 3.3V, 5V, 12V, and an adjustable

type. The package is available in a 5-lead TO-252.

Pin Assignments

( Top View )

TO252-5L

5 SD

4 FB

3 Gnd

2 Output

Metal Tab GND

Pin Descriptions

Name

Description

Operating voltage input

Output

Switching output

GND

Ground

FB

Output voltage feedback control

SD

ON

/OFF Shutdown