Electronic Components Datasheet Search |
|
CAT25512LI-G Datasheet(PDF) 2 Page - ON Semiconductor |
|
CAT25512LI-G Datasheet(HTML) 2 Page - ON Semiconductor |
2 / 17 page CAT25512 www.onsemi.com 2 Table 1. ABSOLUTE MAXIMUM RATINGS Parameters Ratings Units Operating Temperature −45 to +130 °C Storage Temperature −65 to +150 °C Voltage on any Pin with Respect to Ground (Note 1) −0.5 to +6.5 V Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The DC input voltage on any pin should not be lower than −0.5 V or higher than VCC + 0.5 V. During transitions, the voltage on any pin may undershoot to no less than −1.5 V or overshoot to no more than VCC + 1.5 V, for periods of less than 20 ns. Table 2. RELIABILITY CHARACTERISTICS (Note 2) Symbol Parameter Max Units NEND (Note 3, 4) Endurance 4,000,000 Program / Erase Cycles TDR Data Retention 200 Years 2. These parameters are tested initially and after a design or process change that affects the parameter according to appropriate AEC−Q100 and JEDEC test methods. 3. Write Mode: groups of 4 bytes, 25 °C. 4. The device uses ECC (Error Correction Code) logic with 6 ECC bits to correct one bit error in 4 data bytes. Therefore, when a single byte has to be written, 4 bytes (including the ECC bits) are re−programmed. It is recommended to write by multiple of 4 bytes in order to benefit from the maximum number of write cycles. Table 3. D. C. OPERATING CHARACTERISTICS (VCC = 1.8 V to 5.5 V, TA = −40°C to +85°C and VCC = 2.5 V to 5.5 V, TA = −40°C to +125°C, unless otherwise specified) Symbol Parameter Test Conditions Min Max Units ICCR Supply Current (Read Mode) Read, SO open / −40 °C to +85°C VCC = 1.8 V, fSCK = 5 MHz 1.2 mA VCC = 2.5 V, fSCK = 10 MHz 1.8 mA VCC = 5.5 V, fSCK = 20 MHz 3 mA Read, SO open / −40 °C to +125°C 2.5 V < VCC < 5.5 V, fSCK = 10 MHz 3 mA ICCW Supply Current (Write Mode) Write, CS = VCC/ −40 °C to +85°C 1.8 V < VCC < 5.5 V 2 mA Write, CS = VCC/ −40 °C to +125°C 2.5 V < VCC < 5.5 V 2 mA ISB1 Standby Current VIN = GND or VCC, CS = VCC, WP = VCC, HOLD = VCC, VCC = 5.5 V TA = −40°C to +85°C 1 mA TA = −40°C to +125°C 3 ISB2 Standby Current VIN = GND or VCC, CS = VCC, WP = GND, HOLD = GND, VCC = 5.5 V TA = −40°C to +85°C 3 mA TA = −40°C to +125°C 5 mA IL Input Leakage Current VIN = GND or VCC −2 2 mA ILO Output Leakage Current CS = VCC VOUT = GND or VCC −2 2 mA VIL1 Input Low Voltage VCC ≥ 2.5 V −0.5 0.3VCC V VIH1 Input High Voltage VCC ≥ 2.5 V 0.7VCC VCC + 0.5 V VIL2 Input Low Voltage VCC < 2.5 V −0.5 0.25VCC V VIH2 Input High Voltage VCC < 2.5 V 0.75VCC VCC + 0.5 V VOL1 Output Low Voltage VCC ≥ 2.5 V, IOL = 3.0 mA 0.4 V VOH1 Output High Voltage VCC ≥ 2.5 V, IOH = −1.6 mA VCC − 0.8V V VOL2 Output Low Voltage VCC < 2.5 V, IOL = 150 mA 0.2 V VOH2 Output High Voltage VCC < 2.5 V, IOH = −100 mA VCC − 0.2V V Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. |
Similar Part No. - CAT25512LI-G |
|
Similar Description - CAT25512LI-G |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |