Electronic Components Datasheet Search |
|
RE30E-1024-21A-1 Datasheet(PDF) 2 Page - Copal Electronics |
|
RE30E-1024-21A-1 Datasheet(HTML) 2 Page - Copal Electronics |
2 / 3 page Light source Vibration Power OFF Power OFF Power OFF Power ON Power OFF Power ON Power OFF Power OFF Shock High temperature exposure Low temperature exposure Humidity Thermal shock RE30E OPTICAL ENCODERS Starting torque Inertia Shaft loading (When mounting) Radial Axial Net weight Operating temp. range Storage temp. range Protection grade Input voltage Input current Output wave form Output phases (P/R) Resolution Phase difference of outputs A & B Maximum frequencys response Output signal “1 (High)” “0 (Low)” Output impedance ■ STANDARD SPECIFICATIONS DC5 ~ 12 V ± 10 % DC24 V ± 10 % 50 mA maximum Square wave A, B, Z 100, 200, 300, 360, 400, 500 600, 800, 900, 1000, 1024 90° ± 45° 10 kHz (100 P/R), 20 kHz (200P/R) 25 kHz (300 ~ 500 P/R), 60 kHz (600 P/R) 80 kHz (800 P/R), 90 kHz (900P/R) 100 kHz (1000 ~ 1024 P/R) (Vcc − 1) V min. (Vcc − 2) V min. + 0.5 V max. + 1.0 V max. 2.2 kΩ LED ● Electrical characteristics ● Mechanical characteristics 0.29 mN·m {3 gf·cm} maximum 2 g·cm 2 maximum 19.6 N {2 kgf} maximum 9.81 N {1 kgf} maximum Approx. 70 g ● Environmental characteristics 0 ~ 70 °C – 20 ~ 80 °C IP40 Test item ■ RELIABILITY TEST The output wave form shall satisfy the STANDARD SPECIFICATIONS after the following tests. Test conditions Amplitude : 1.52 mm or 98.1 m/s 2 (10 G) whichever is smaller. 10 ~ 500 Hz excursion 0.25 h/cycle, 8 cycles each for X, Y, Z, directions. 3 times each in 6 directions (X, Y, Z) at 490 m/s 2 (50 G), 11 ms. 80 °C 96 h (To be measured after leaving samples for 1 h at normal temperature and humidity after the test.) 70 °C 96 h − 20 °C 96 h 0 °C 96 h 40 °C Relative humidity 90 〜 95 % 96 h (To be measured after wiping out moisture and leaving samples for 1 h at normal temperature and humidity after the test.) To be done 10 cycles with the following condition (To be measured after leaving samples for 1 h at normal temperature and humidity after the test.) 80 °C 1 h、− 20 °C 1 h |
Similar Part No. - RE30E-1024-21A-1 |
|
Similar Description - RE30E-1024-21A-1 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |