Extractor Tool for Crimp Terminals

Order No: ATS-638244600

Release Date: 06-18-15

UNCONTROLLED COPY

Page 2 of 3

Revision: A

Revision Date: 06-18-15

SLOT IN THE

CONNECTOR

Figure 3

EXTRACTOR

TOOL

NANO-FIT

CONNECTOR

WIRE

TPA IN LOCKED

POSITION

Figure 2

INSERT THE

SCREWDRIVER

UNDER THE TAB

NANO-FIT

CONNECTOR

CRIMPED

WIRE

TANG IN THE

TERMINAL

Figure 4

EXTRACTOR

TOOL

HOUSING

TERMINAL

PUSH CRIMPED

WIRE

OPERATION:

When removing a damaged crimped

wire from the Nano-Fit™ power

connector follow the steps below:

1. Position the blade of the extraction

tool into the slot (in line with the

crimped terminal to be removed)

in the front face of the housing as

shown in Figure 3.

2. Push the terminal forward in the arrow direction before using the Extractor Tool as shown in Figure 4.

3. Insert the Extractor Tool into the slot of the connector housing. Push extractor tool into the slot until it clicks or

comes to a stop. Do not force the extractor tool any farther, otherwise it may damage the housing.

4. Depress the terminal tang and push the terminal back through the connector slot.