10

Figure 8. Recommended Panel Mounting

Package and Handling Instructions

Flammability

The HFCT-5964TL/TG/NL/NG/

ATL/ATG transceiver housing

consists of high strength, heat

resistant and UL 94 V-0 flame

retardant plastic and metal

packaging.

Recommended Solder and Wash

Process

The HFCT-5964TL/TG/NL/NG/

ATL/ATG are compatible with

industry-standard wave solder

processes.

Process plug

This transceiver is supplied with

a process plug for protection of

the optical port within the LC

connector receptacle. This

process plug prevents

contamination during wave

solder and aqueous rinse as well

as during handling, shipping and

storage. It is made of a high-

temperature, molded sealing

material that can withstand +85

°C, and a rinse pressure of 110

lbs per square inch.

The process plug should only be

used once. After removing it

from the transceiver, it must not

be used again as a process plug;

however, if it has not been

contaminated, it can be reused

as a dust cover.

Recommended Solder fluxes

Solder fluxes used with the

HFCT-5964TL/TG/NL/NG/ATL/

ATG should be water-soluble,

organic fluxes. Recommended

solder fluxes include Lonco

3355-11 from London Chemical

West, Inc. of Burbank, CA, and

100 Flux from Alpha-Metals of

Jersey City, NJ.

Recommended Cleaning/Degreasing

Chemicals

Alcohols: methyl, isopropyl,

isobutyl.

Aliphatics: hexane, heptane

Other: naphtha.

Do not use partially halogenated

hydrocarbons such as 1,1.1

trichloroethane, ketones such as

MEK, acetone, chloroform, ethyl

acetate, methylene dichloride,

phenol, methylene chloride, or

N-methylpyrolldone. Also,

Agilent does not recommend the

use of cleaners that use

halogenated hydrocarbons

because of their potential

environmental harm.

LC SFF Cleaning Recommendations

In the event of contamination of

the optical ports, the

recommended cleaning process

is the use of forced nitrogen. If

contamination is thought to have

remained, the optical ports can

be cleaned using a NTT

international Cletop stick type

(diam. 1.25 mm) and HFE7100

cleaning fluid.

15.24

(0.6)

DIMENSIONS IN MILLIMETERS (INCHES)

1.

FIGURE DESCRIBES THE RECOMMENDED FRONT PANEL OPENING FOR A LC OR SG SFF TRANSCEIVER.

2.

SFF TRANSCEIVER PLACED AT 15.24 mm (0.6) MIN. SPACING.

0000000000000000000000000000

0000000000000000000000000000

14.22 ±0.1

(0.56

±0.004)

000

000

000

000

000

000

000

000

000

000

10.16 ±0.1

(0.4 ±0.004)

DETAIL A

00000000

00000000

00000000

00000000

00000000

TOP OF PCB

000

000

000

000

000

000

1

(0.039)

00000000000

00000000000

00000000000000000000000000000

00000000000000000000000000000

A

SOLDER POSTS

15.75 MAX. 15.0 MIN.

(0.62 MAX. 0.59 MIN.)

SECTION B - B

15.24

(0.6)

BB