105FX-POE Industrial Ethernet Switch

N-Tron Networking Series

Unmanaged Industrial Ethernet Switch

Switch is designed to transmit power along with data over

an Ethernet network. It is ideal for PoE capable devices

where running anAC power feed is either not possible or cost

effective. This allows an end user to power a PoE camera,

wireless access point, or any other PoE capable device without

the need for running separate wires for power. This also

makes it possible to utilize a centralized battery backup for

all these devices.

PRODUCT FEATURES

• Compact, Space Saving Package

• Full IEEE 802.3 and 802.3af Compliance

• American Bureau of Shipping (ABS) Type Approval

• Certified for Rail Applications

• Four 10/100BaseTX RJ-45 Ports (4 Mode A PoE Ports)

• One 100BaseFX Port with ST or SC Connectors

• Unmanaged Operation

• Extended Environmental Specifications

•-40ºC to 85º Operating Temperature

• Automatic Detection of Connected PoE Devices

• Support for Full/Half Duplex Operation

• Auto-sensing Duplex, Speed, and MDIX (RJ-45)

• Up to 1.0 Gb/s Maximum Throughput

• Full Wire Speed Communications

• Supports 15.4 Watts per port

(13 Watts at the PD)

• Redundant Power Inputs (46-49 VDC)

• Power Fault Status LED's

• LED Link/Activity Status Indication

• LED PoE Status Indication

• Hardened Metal DIN-Rail Enclosure

PRODUCT OVERVIEW

The 105FX-POE Industrial Network Switch is designed

to meet the most demanding industrial communications

requirements by providing high throughput and minimum

downtime while also providing power to PoE capable devices

over the Ethernet network.

The 105FX -P O E provides four RJ-45 auto

sensing10/100BaseTX ports. All ports are full/half

duplex capable, using "state of the art" Ethernet switching

technology. All four RJ-45 ports also act as PoE ports

allowing power to pass through four of the eight strands

of CAT5 cable. Each PoE port supports up to 15.4 watts

of power. The 5th port is a 100BaseFX fiber optic uplink

utilizing industry standard ST or SC duplex connectors.

The 105FX-POE auto-negotiates the speed and flow control

capabilities of the four TX port connections, and configures

itself automatically.

The

addresses, enabling these products to support extremely

sophisticated and complex network architectures.

The 105FX-POE automatically detects any PoE device that is

connected and powers it accordingly. If a PoE fault is detected

on a specific port the Auto-disconnect feature disables PoE

power on that port, allowing only data communications to

pass, reducing the risk of damaging costly equipment.

The 105FX-POE is an ideal candidate for providing data

and power to wireless LAN access points, network cameras,

VoIP, and other PoE capable devices. The product also helps

reduce costs by eliminating the need for electrical wiring and

electrician expenses.

The 105FX-POE has extended operating environmental

specifications to meet the harsh needs of the industrial

environment. For cost savings and convenience the network

switch can be DIN-Rail mounted alongside Ethernet I/O or

other Industrial Equipment.

To increase reliability the 105FX-POE provides dual

redundant power inputs. Two power LED's are also

provided on this unit indicating a valid power source on both

the redundant power inputs and also indicating when a power

fault bus occurs.

THEINDUSTRIALNETWORKCOMPANY