Electronic Components Datasheet Search |
|
LPS5030-185MR Datasheet(PDF) 1 Page - Coilcraft lnc. |
|
LPS5030-185MR Datasheet(HTML) 1 Page - Coilcraft lnc. |
1 / 2 page Shielded Power Inductors–LPS5030 Document 581-1 Document 581-1 Revised 09/02/15 DCR SRF Isat (A)5 Irms (A)6 Inductance2 max3 typ4 10% 20% 30% 20°C 40°C Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise LPS5030-901MR_ 0.90 0.040 250 3.8 4.0 4.1 2.10 2.80 LPS5030-122MR_ 1.2 0.043 210 3.5 3.6 3.7 2.00 2.65 LPS5030-172MR_ 1.7 0.051 190 3.0 3.2 3.3 1.90 2.50 LPS5030-222MR_ 2.2 0.057 168 2.9 3.1 3.2 1.60 2.15 LPS5030-332MR_ 3.3 0.066 125 2.3 2.5 2.6 1.40 1.80 LPS5030-472MR_ 4.7 0.083 84 1.9 2.0 2.0 1.30 1.75 LPS5030-562MR_ 5.6 0.089 70 1.8 1.8 1.9 1.25 1.65 LPS5030-682MR_ 6.8 0.099 56 1.6 1.7 1.7 1.20 1.60 LPS5030-822MR_ 8.2 0.125 45 1.6 1.7 1.7 1.10 1.55 LPS5030-103MR_ 10.0 0.127 30 1.4 1.4 1.4 1.00 1.50 LPS5030-123MR_ 12.0 0.155 24 1.3 1.4 1.4 0.95 1.40 LPS5030-153MR_ 15.0 0.160 32 0.80 0.90 0.90 0.92 1.40 LPS5030-183MR_ 18.0 0.170 27 0.80 0.82 0.87 0.90 1.30 LPS5030-223MR_ 22.0 0.190 24 0.70 0.75 0.78 0.88 1.25 LPS5030-333MR_ 33.0 0.260 19 0.60 0.63 0.64 0.85 1.20 LPS5030-473MR_ 47.0 0.330 16 0.50 0.53 0.55 0.75 1.00 LPS5030-683MR_ 68.0 0.440 12 0.40 0.43 0.44 0.65 0.900 LPS5030-823MR_ 82.0 0.470 11 0.38 0.40 0.40 0.60 0.830 LPS5030-104MR_ 100 0.600 10 0.27 0.31 0.32 0.55 0.750 LPS5030-124MR_ 120 0.800 9 0.26 0.29 0.30 0.45 0.660 LPS5030-154MR_ 150 0.860 7.5 0.22 0.25 0.263 0.42 0.570 LPS5030-224MR_ 220 1.35 6.0 0.21 0.235 0.245 0.36 0.500 LPS5030-334MR_ 330 1.80 5.0 0.155 0.155 0.200 0.32 0.420 LPS5030-474MR_ 470 2.80 4.0 0.117 0.134 0.146 0.28 0.370 LPS5030-564MR_ 560 3.20 3.6 0.110 0.130 0.140 0.23 0.320 LPS5030-684MR_ 680 3.80 3.0 0.100 0.120 0.126 0.20 0.290 LPS5030-105MR_ 1000 5.10 2.5 0.100 0.110 0.110 0.18 0.250 LPS5030-155MR_ 1500 7.60 2.0 0.068 0.080 0.089 0.15 0.210 LPS5030-185MR_ 1800 10.0 1.8 0.069 0.081 0.086 0.13 0.170 LPS5030-225MR_ 2200 11.0 1.6 0.063 0.074 0.080 0.10 0.150 LPS5030-335MR_ 3300 19.5 1.3 0.056 0.063 0.067 0.090 0.125 LPS5030-475MR_ 4700 26.0 1.1 0.049 0.056 0.059 0.080 0.110 • Very low DCR; excellent current handling • 4.9 × 4.9 mm footprint; less than 3 mm tall Designer’s Kit C420 contains 3 each of all values Core material Ferrite Environmental RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Weight 226 – 244 mg Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750/7 ″ reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.32 mm thick, 8 mm pocket spacing, 3.1 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. 1. Please specify termination and packaging codes: LPS5030-105MRC Termination: R= RoHS compliant matte tin over nickel over silver. Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: C= 7 ″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13 ″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (2500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4192A impedance analyzer or equivalent. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current at 25°C that causes the specified induc- tance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. |
Similar Part No. - LPS5030-185MR |
|
Similar Description - LPS5030-185MR |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.COM |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Datasheet Upload | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |